[arm-allstar] Two nodes on the same network won't connect to

[Sean McCarthy]

Just a note. You will now probably find these nodes will not connect when
on separate networks.

I did this for my personal node when I was at home but found it would no
longer connect when away from home, so it was of little use for me...

On Sun, Jul 22, 2018 at 1:15 PM, "ssedgwick via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thanks David.  It worked...
>
> Steve_WB8GRS
>
> -Nano rpt.config-Go to the end of the file. You will see ip config
> Example, must do it for each node:
> 12345 = radio at 192.168.001/12345,NONE54321 = radio at
> 192.168.002:4570/54321,NONE
> www.hamviop.org has instructions.
>
>
> Sent from my T-Mobile 4G LTE Device
> -------- Original message --------From: ssedgwick via arm-allstar
> <arm-allstar at hamvoip.org> Date: 7/21/18  9:44 PM  (GMT-06:00) To:
> arm-allstar at hamvoip.org Cc: ssedgwick <ssedgwick at suddenlink.net>
> Subject: Re: [arm-allstar] Two nodes on the same network won't connect to
> Not sure how to do that?  Where are the configuration settings I need to
> change?
>
> Thanks,
> Steve_WB8GRS
>
> Did you add the local ips for the nodes to both configuration settings?
>
> Router ports don't get used in local connections.
>
> On Sat, Jul 21, 2018, 19:19 "ssedgwick via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > This one has got me stumped.
> >
> > I have two node connected to the same router in my home.  One is
> connected
> > to the routers using Ethernet and the other node is connected via WiFi.
> > All port forwarding is setup for both nodes.  Both nodes can connect to
> > other nodes outside my home network and nodes outside my network can
> > connect to either of these nodes.  Of course both nodes show up as
> > registered and both nodes download the rpt_extnodes list correctly.  Both
> > nodes are running the lastest hamVOIP with latest updates.  All seems
> well
> > up to this point.
> >
> > The problem is if I try to connect these two nodes together, they won’t
> > connect.  I seem to recall seeing this issue before, but looking back in
> > earlier email I could not find it, so I’m hoping someone knows the answer
> > why they won’t connect to each other?
> >
> > Thanks,
> > 73,
> > Steve_WB8GRS
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>