[arm-allstar] Zioper: Registration Failed (Registration Refused (29))

[Mike Besemer]

Lloyd,

Yep, I tried it both with and without the :4569 and with my internal and external IPs.  No joy.

Taking a step back for a few days is often helpful.  

Still wondering if I can hit a micro SD card at 100 yards with my old .308!

73,

Mike
WM4B

From: Lloyd Duck [mailto:lduck at me.com] 
Sent: Sunday, July 15, 2018 2:17 PM
To: ARM Allstar
Cc: Mike Besemer; Doug Crompton
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration Refused (29))

Mike, 

Just wondering in the Zoiper under settings and Server. Are you putting ipaddress:4569? 

I do have mine working and it did take a few days of walking off and counting to 100,000 not the shot the pi. 


On Jul 15, 2018, at 11:42 AM, Mike Besemer via arm-allstar <arm-allstar at hamvoip.org> wrote:
No joy, Doug.  I've wasted most of a week on this and it's obviously not
going to work.  The directions are clear enough (although there are some
conflicting versions posted on the net), but no-go.  

I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
feel that way.  I'm not sure how the average ham finds the time to work his
way through this.  I've done Motorola repeater conversions in less time than
I've invested here.

Time to walk away for a while before I use the Pi for target practice.

Mike
WM4B

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: Sunday, July 15, 2018 12:50 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration Refused
(29))

Mike,

All examples I have seen have the iax.conf context name and the username
in that context set to the same value. Try doing that. I believe the
application might use the context name. This is not to be confused with the
context= parameter which defines the extensions context.

So the example could be in iax.conf

[iax-zoiper]
user=iax-zoiper
....
...

Also see -

https://hamvoip.org/ConnectZoipertoAllstarNode.pdf


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
arm-allstar at hamvoip.org> wrote:


That's the frustrating part, Doug... it really looks like it should be
working. I'm setting it up for a friend who is an iphone user; wish there
was an iaxrpt app for iphone.

Here's my stanzas from iax.conf and extensions.conf.  I checked for, and
eliminated, trailing spaces as suggested by Steve - WB4BXO, with no luck.

[myphone]
username=zoiper
type=friend
context=myphone
host=dynamic
auth=md5
secret=48166
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
callerid=WM4B


[myphone]
exten => 48166,1,answer()
exten => 48166,n,Playback(rpt/node)
exten => 48166,n,Playback(digits/4)
exten => 48166,n,Playback(digits/1)
exten => 48166,n,Playback(digits/7)
exten => 48166,n,Playback(digits/6)
exten => 48166,n,Playback(digits/4)
exten => 48166,n,Playback(rpt/connected)
exten => 48166,n,rpt(48166|Pv)

Mike
WM4B

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: Friday, July 13, 2018 3:24 PM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
Refused
(29))

Mike,

There would be absolutely nothing different in hamvoip as long as you are
using the same iax and extensions stanzas. That would indicate that either
the username or password are not correct. If you are using an Android
device then you should checkout iaxrpt for that. Howto's for that and
zopier at the hamvoip.org site.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

Hi all,

I'm having an issue getting Zoiper to work with HamVoIP.

Been through the setup on the website a half-dozen times with no luck.

IAXRPT works fine, so it isn't a port issue.

Zioper also works fine on my ASL build.

Zioper reports: Registration Failed (Registration Refused (29))

Mike
WM4B
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org