[arm-allstar] Quick Update on private Nodes

David david at kg5rdf.com
Fri Jul 13 02:18:42 EST 2018


Doug,
Thanks for the information! 6 nodes stayed connected to the public hub, 7 repeater nodes stayed connected to the private Hub. The connection between the public to private nodes dropped. All nodes use *73. Had the net across 25 repeaters tonight and all was good. About 250 ptts within 1.5 hours. Everything stayed up.The public hub or private hub  would of dropped all nodes not just one? The private connection point node stayed connected the private Hub,  it was only disconnected from the public hub. The public hub and private connection point are on the same router and do not use the internet for connectivity. Hopefully that makes sense. 
Thanks again for everything you and David do. David pulled my butt out of the fire last week!
David KG5RDF




Sent from my T-Mobile 4G LTE Device
-------- Original message --------From: Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> Date: 7/13/18  12:53 AM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Doug Crompton <wa3dsp at gmail.com> Subject: Re: [arm-allstar] Quick Update on private Nodes 
David,

 lsnodes is included in the image. No need to install anything just run it
from your browser. Those are old instruction to install on a system that
does not have it but they do explain what it is.

If a unregistered privately routed node disconnects you have Internet
issues!  Are you using permanent connects (*73) ??


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Fri, Jul 13, 2018 at 12:49 AM, "David via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I converted the system to private nodes. Latency has been improved. The
> public hub  node disconnected from the private link node one time so far.
> The private nodes keep on ticking. Time will tell what the issue was. Left
> DNS beta on all nodes.
> So far I found this write up:
> Http://crompton.com/hamradio/allstar/lsnodes
> Echolinks give real time connection status of private nodes. Before I
> undertake putting together private node status display, are there other
> things I should be looking at??
> Thanks David KG5RDFNctc.info
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org


More information about the arm-allstar mailing list