[arm-allstar] One way audio??? Forcing reconnect.

[David McGough]

Hi Skyler,

That's very curious. There have been a handful of other reported 
instances of the one-way audio tests forcing undesired disconnects. So 
far, all those instances had been isolated to one specific HamVoIP hub 
connecting with micro-node devices. I've tried to reproduce the problem 
here repeatedly and have been unsucessful....In fact, I've got a couple 
(or more) micro-node users connected about all day, every day.

Please try connecting to my test hub (2290) when you have chance and check 
for any disconnect problems there.

What Asterisk image are you running of your hub and what type of
hardware?? The one-way audio mechanism is looking for some specific IAX2
telemetry that has been included in the app_rpt software for at least 10
years now. So, it should always be present for users running app_rpt. Note 
that the telemetry isn't present in IaxRpt and perhaps other derivative 
IAX clients.



73, David KB4FXC


On Fri, 6 Jul 2018, "Skyler F via arm-allstar" wrote:

>  So I finally decided to give the hamvoip image a try. Although it would be
> great if you guys were a little more open source, I need something that has
> halfway decent audio.
> 
> The image is at the latest version.
> 
> I tried to connect my hub in, and I get good 2-way audio for about 45
> seconds, when I immediately get a disconnect  and this message on the cli:
> 
> ERROR[392]: app_rpt.c:18604 rpt: No link messages from [46079] in 46
> seconds -- One way audio??? Forcing reconnect.
> 
> This only happens when I call the raspberry pi 2 node in from my hub, not
> the other way. Any suggestions? This node needs to be called in, cannot
> connect outbound from the node itself.
> 
> Thanks so much.
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>