[arm-allstar] Connect time
Doug Crompton
wa3dsp at gmail.com
Wed Jul 4 14:18:25 EST 2018
Jim,
No question is a dub question.
Happy 4th.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Wed, Jul 4, 2018 at 3:09 PM, "James Hause via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Thanks so much Doug, I am sure it was a dumb question on my part.
> Appreciate your patience. Have a Great 4th !!!
>
> On Wed, Jul 4, 2018 at 2:06 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Jim,
> >
> > Either way is acceptable.
> >
> > Doug
> >
> > On Wed, Jul 4, 2018 at 2:38 PM, "James Hause via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Doug,
> > > I do understand I don't have to do it manually, that it was put in
> > > automatically,
> > > I was just questioning that the example on the site had register=., and
> > > mine had register=>
> > > I was wondering if the > should be in the command line.
> > > I do appreciate you spending time answering back on a holiday.
> > >
> > > On Wed, Jul 4, 2018 at 1:19 PM, "Doug Crompton via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Jim,
> > > >
> > > > Yes what you say is correct but this is NOT new as it has long been
> > the
> > > > way to register Allstar. When you setup your hamvoip node your node
> > > number
> > > > and password are automatically put in that line. There is no reason
> for
> > > you
> > > > to do it manually unless it is not correct.
> > > >
> > > >
> > > > *73 Doug*
> > > >
> > > > *WA3DSP*
> > > >
> > > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> > > >
> > > >
> > > >
> > > > On Wed, Jul 4, 2018 at 1:44 PM, "James Hause via arm-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > Doug, just one other note. According to Allstar Link site, it has
> the
> > > > > following info on registering:
> > > > >
> > > > > To use the new update process, a registration statement is added to
> > the
> > > > > general section of /etc/asterisk/iax.conf using a text editor such
> as
> > > vi,
> > > > > emacs, or nano. The format of the register statement is:
> > > > >
> > > > > register=node:password at register.allstarlink.org
> > > > >
> > > > > I checked my iax.conf, and it has the following
> > > > > register => 46738:password at register.allstarlink.org (Note, I
> > replaced
> > > > > here
> > > > > my password # with the word password, assume I don't want this
> > public)
> > > > >
> > > > > Sorry for a dumb question here, but note mine has register =>,
> where
> > > the
> > > > > example above shows register=, ie no >.
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Jul 4, 2018 at 11:56 AM, James Hause <hausejd at gmail.com>
> > > wrote:
> > > > >
> > > > > > Thanks Doug for the reply. I am still learning, will spend some
> > time
> > > > > > digesting what you sent.
> > > > > > I have a simplex node on a Pi3, with latest version of hamvoip. I
> > > check
> > > > > > the Allstar Active Nodes page,
> > > > > > shows me as registered, but I have not executed the command you
> > > > > > referenced. I need to do more homework
> > > > > > on my end, the how to list has provided help, will keep on
> > > researching.
> > > > > > Need to come up to speed on what DNS lookup
> > > > > > is, how it works, etc. Call sign is KF5LBT, node is 46738.
> > > > > >
> > > > > > On Wed, Jul 4, 2018 at 11:36 AM, "Doug Crompton via arm-allstar"
> <
> > > > > > arm-allstar at hamvoip.org> wrote:
> > > > > >
> > > > > >> Jim,
> > > > > >>
> > > > > >> Not sure if you are now using DNS lookup but I if so I can
> > assure
> > > > you
> > > > > >> that is not the problem. If you are not and would like to try it
> > let
> > > > me
> > > > > >> know. This could also be because you are not registering right
> > away
> > > at
> > > > > >> boot. You should check that using check_reg.sh at the Linux
> > prompt.
> > > If
> > > > > you
> > > > > >> are not registered you will not be able to connect whether or
> not
> > > you
> > > > > are
> > > > > >> using DNS lookup. There have been sporadic registration issues
> for
> > > > quite
> > > > > >> some time especially with nodes going on and off line often.
> > > > > >>
> > > > > >> The classic way of looking up nodes on Allstar has been that you
> > > boot,
> > > > > >> then
> > > > > >> register, then download the flat file of all nodes mapped to IP
> > > > > addresses.
> > > > > >> This is around a 150K byte file. So you have the info but the
> node
> > > you
> > > > > are
> > > > > >> trying to connect to does not until they do a periodic download
> of
> > > the
> > > > > >> file. This could take up to 15 minutes.
> > > > > >>
> > > > > >> Using DNS and assuming that BOTH ends are using it, the
> > information
> > > > > >> propagates in under 30 seconds and a connection can take place.
> > But
> > > if
> > > > > >> only
> > > > > >> one end was using DNS lookup the same long delay would apply.
> > > > > >>
> > > > > >> So to sum it up you first have to register and be in the
> database,
> > > > then
> > > > > >> you
> > > > > >> can connect out but the node you are trying to connect to cannot
> > > > > complete
> > > > > >> the connection until THEY have your connection information.
> > > > > >>
> > > > > >> Once the DNS and registration system is fully in place the
> > > connection
> > > > > time
> > > > > >> delay will be immediate at boot between nodes using that method
> > and
> > > a
> > > > > lot
> > > > > >> of the current problems will go away. This is yet another reason
> > to
> > > > > retire
> > > > > >> your Beaglebone Blacks and update to V1.5 using a Pi!
> > > > > >>
> > > > > >>
> > > > > >> *73 Doug*
> > > > > >>
> > > > > >> *WA3DSP*
> > > > > >>
> > > > > >> *http://www.crompton.com/hamradio <http://www.crompton.com/
> > hamradio
> > > >*
> > > > > >>
> > > > > >>
> > > > > >> On Wed, Jul 4, 2018 at 10:01 AM, "James Hause via arm-allstar" <
> > > > > >> arm-allstar at hamvoip.org> wrote:
> > > > > >>
> > > > > >> > For over a week, when I power up my simplex node, I can't
> > connect
> > > to
> > > > > any
> > > > > >> > other nodes until my node has been running for well over 30
> > > minutes
> > > > to
> > > > > >> an
> > > > > >> > hour. Once I am able to connect, all works fine, can
> disconnect
> > > and
> > > > > >> > connect just fine. This have something to do with the DNS
> > lookup?
> > > > I
> > > > > >> know
> > > > > >> > a change for that is about to be released.
> > > > > >> > _______________________________________________
> > > > > >> >
> > > > > >> > arm-allstar mailing list
> > > > > >> > arm-allstar at hamvoip.org
> > > > > >> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >> >
> > > > > >> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > > >> >
> > > > > >> _______________________________________________
> > > > > >>
> > > > > >> arm-allstar mailing list
> > > > > >> arm-allstar at hamvoip.org
> > > > > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >>
> > > > > >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > > >>
> > > > > >
> > > > > >
> > > > > _______________________________________________
> > > > >
> > > > > arm-allstar mailing list
> > > > > arm-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > >
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
More information about the arm-allstar
mailing list