[arm-allstar] Pi 3b+ physical to logical USB map locking

[Doug Crompton]

Jack,

  Did you just move the SD card over to the 3B+?  I think you need to
follow the same process as you did on the prior board of bringing one
online at a time. Comment out the rxchannel line for everything but the
first and then bring them online one at a time uncommenting each rxchannel
and storing the setup as per the setup instructions. You may have to delete
the /etc/asterisk/simpleusb_tune_usb.conf file first as it has the old
mappings. Then do the setup one at a time.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Jul 1, 2018 at 12:55 PM, "Jack Koehler 2 via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello David (and Doug),
> Had been using 3b for a while with 4 FOBs for remote VHF/UHF transceiver
> remote control from a MIC node.
> Rebooting the 3b would always come up with the same logical to physical
> mapping.
> Now that I have moved to the b+, I get random mapping.  Tried booting with
> the 1st one installed then adding the others in the original order I did
> when first setting them up but still get a couple swapped.
> Is there any way to lock the mapping? Or modifying the probe order?
> Thanks.
> Jack  K3OYH
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>