[arm-allstar] Trying to Get Broadcastify Running on My Node

[Doug Crompton]

OK, I took your config and ran it here. I think you have spaces where
spaces should not be. I am not sure this is just in the translation to you
copy/pasting it or it is really there. The beginning define has to exactly
match the closing define -

<svrinfobitrate>16</ svrinfobitrate>

should be

<svrinfobitrate>16</svrinfobitrate>

Once I corrected all of the extra spaces and ran the manual qvc line I did
not see the errors.

[root at Pi3-test allmon2]# ezstream -qvc /etc/ezstream.xml
ezstream[4214]: default: stream has no configuration

Meaning this user/pass is wrong or you have not configured it. I suspect
you masked or changed the user/pass in the example.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*





On Mon, Jan 29, 2018 at 12:22 PM, stephen Cook <va3kxp at yahoo.com> wrote:

> Hi Doug,
>
> I was pretty sure that was what I had done, but just to be sure, I did it
> again (see below)
>
> # pacman -Syu hamvoip-ezstream
> :: Synchronizing package databases...
>  core is up to date
>  extra is up to date
>  community is up to date
>  alarm is up to date
>  aur is up to date
>  hamvoip is up to date
> warning: hamvoip-ezstream-0.1-2 is up to date -- reinstalling
> :: Starting full system upgrade...
> resolving dependencies...
> looking for conflicting packages...
>
> Packages (1) hamvoip-ezstream-0.1-2
>
>
> :: Proceed with installation? [Y/n] Y
> (1/1) checking keys in keyring
> [######################] 100%
> (1/1) checking package integrity
> [######################] 100%
> (1/1) loading package files
> [######################] 100%
> (1/1) checking for file conflicts
> [######################] 100%
> (1/1) checking available disk space
> [######################] 100%
> :: Processing package changes...
> (1/1) reinstalling hamvoip-ezstream
> [######################] 100%
> ]# ezstream -qvc /etc/ezstream.xml
> ezstream: /usr/lib/libcrypto.so.1.0.0: no version information available
> (required by /usr/local/lib/libshout.so.3)
> ezstream: /usr/lib/libssl.so.1.0.0: no version information available
> (required by /usr/local/lib/libshout.so.3)
> ezstream[2435]: default: stream has no configuration
>
> Do you have anything else I can try?
>
> Thank you and 73,
>
> Stephen - va3kxp
> va3kxp at yahoo.com
>
>
> On Monday, January 29, 2018, 12:00:37 PM EST, Doug Crompton via
> arm-allstar <arm-allstar at hamvoip.org> wrote:
>
>
> Stephen,
>
>   I have never seen this happen but it seems libshout does not like
> something about ezstream. The ezstream download is now in the hamvoip
> repository. This is an updated version. Did you download it this way?
>
> pacman -Syu hamvoip-ezstream
>
> If not try downloading this version.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/ hamradio <http://www.crompton.com/hamradio>*
>
>
> On Mon, Jan 29, 2018 at 10:23 AM, "stephen Cook via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> Good Morning,
>
> I am trying to get Broadcastify running on my node.  I have made sure I
> have the most recent updates applied to the hamvoip image (RPi2-3 Version
> 1.5rc4-14 Allstar - January 22, 2018 - KB4FXC, WA3DSP).  I think I followed
> the how-to to the letter, and have gone back over it several times. I get
> to the test stage and always get the following;
>
> # ezstream -qvc /etc/ezstream.xml
> ezstream: /usr/lib/libcrypto.so.1.0.0: no version information available
> (required by /usr/local/lib/libshout.so.3)
> ezstream: /usr/lib/libssl.so.1.0.0: no version information available
> (required by /usr/local/lib/libshout.so.3)
> ezstream[15192]: default: stream has no configuration
>
> My ezstream.xml file looks like this;
>
> ]# cat /etc/ezstream.xml
> <ezstream>
>     <url>http://audio1. radioreference.com:80/ hfkhsdkhfsk
> <http://audio1.radioreference.com:80/hfkhsdkhfsk></url>
>     <sourcepassword> jlkjsdjfldsjf</sourcepassword>
>     <format>MP3</format>
>     <filename>stdin</filename>
>     <svrinfoname>VA3KKF 443.9750 MHz Repeater</svrinfoname>
>     <svrinfourl>http://www. radioreference.com/
> <http://www.radioreference.com/></ svrinfourl>
>     <svrinfogenre>Amateur Radio</svrinfogenre>
>     <svrinfodescription>VA3KKF 443.9750 MHz Repeater</svrinfodescription>
>     <svrinfobitrate>16</ svrinfobitrate>
>     <svrinfochannels>1</ svrinfochannels>
>     <svrinfosamplerate>22050</ svrinfosamplerate>
>     <svrinfopublic>1</ svrinfopublic>
> </ezstream>
>
> Can anyone tell me what I am doing wrong?  Any and all assistance is
> appreciated.
>
> Thank you and 73,
>
> Stephen - va3kxp
> va3kxp at yahoo.com
>
> ______________________________ _________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi- bin/mailman/listinfo/arm- allstar
> <http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar>
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20180129/aab7df46/attachment.html>