[arm-allstar] Issues with Broadcastify streaming audio off of my node...

Mr. Possum (Bill) flatpossum1231 at yahoo.com
Thu Jan 18 06:55:05 EST 2018 

Rob, 

No it wasn't in the example...  I did so much editing back and forth yesterday it was mind boggling...  In the my efforts to hide the addresses and passwords, I edited it right out of existence in the example...
Once I found somebody elses instructions on how to do it, and found the pkg-config trick, everything fell into place.
I ended up doing it on multiple RasPi's...  And it worked for me too!
73,
Bill - N5MBM


      From: W2YMM via arm-allstar <arm-allstar at hamvoip.org>
 To: ARM Allstar <arm-allstar at hamvoip.org> 
Cc: W2YMM <w2ymm1 at gmail.com>
 Sent: Thursday, January 18, 2018 12:36 AM
 Subject: Re: [arm-allstar] Issues with Broadcastify streaming audio off of my node...
   
I spoke too soon.  I missed the part about having to install pkg-config
I did
pacman -Sy pkg-config
cd /etc/ezstream-0.6.0
make
./configure
make
make install

rebooted the pi and then I got the online message from Broadcastify.


Bob W2YMM




Robert Prybyzerski Jr
W2YMM
631-960-1051
http://www.w2ymm.com

On Thu, Jan 18, 2018 at 12:59 AM, W2YMM <w2ymm1 at gmail.com> wrote:

> Bill, Is the error you found in you .xml file visible in the sample you
> first posted ? I was trying to find it but didn't.
> I also decided to try this out and seem to be getting similar errors.
> I'll keep looking...
> Thanks  Bob W2YMM
>
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Virus-free.
> www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
> <#m_7902988140064490239_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> Robert Prybyzerski Jr
> W2YMM
> 631-960-1051 <(631)%20960-1051>
> http://www.w2ymm.com
>
> On Wed, Jan 17, 2018 at 5:14 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> I am on my way out but here is a quick message on this... The line in
>> rpt.conf should look like this:
>>
>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
>> --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
>> /etc/ezstream.xml
>>
>> ​Cut and paste it to make sure you have it right. It must go in the node
>> stanza for the node you want to broadcast.
>>
>> Also run ezstream manually at the Linux prompt to make sure it is working
>> and the config file has no errors -
>>
>> ​ezstream -qvc /etc/ezstream.xml
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>>
>>
>>
>>
>>
>>
>> On Wed, Jan 17, 2018 at 4:00 PM, "Mr. Possum (Bill) via arm-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>> > I followed the how to, I searched past message traffic here, I searched
>> > Google, but I am still having an issue...
>> > rpt.conf line says -
>> > outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8.0
>> > --bitwidth 16 - - | /usr/local/bin/ezstream -c
>> > /etc/ezstream.xmln/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
>> > --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
>> > /etc/ezstream.xml
>> >
>> > The feed never comes up and in my CLI window I keep getting the
>> following,
>> > over and over and over again...
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8.0 --bitwidth 16 - - |
>> /usr/local/bin/ezstream
>> > -c /etc/ezstream.xml
>> >
>> > I tried this rpt.conf line from another internet tutorial -
>> >
>> > outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
>> > --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
>> > /etc/ezstream.xml
>> > The feed never comes up and in my CLI window I keep getting this over
>> and
>> > over and over again -
>> >
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
>> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
>> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
>> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
>> >  -- app_rpt node 42413 starting output stream /bin/sh,-c,/usr/bin/lame
>> > --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
>> > /usr/local/bin/ezstream -qvc /etc/ezstream.xml
>> >
>> >
>> >
>> > My ezstream.xml file looks like this -
>> >
>> > <ezstream>
>> >    <url>http://audio1.broadcastify.com:80/TheMountNameTheyGaveMe</url>
>> >    <sourcepassword>ThePassWordTheyGaveMe</sourcepassword>
>> >
>> >    <format>MP3</format>
>> >    <filename>stdin</filename>
>> >    <svrinfoname>N5MBM 52.3500 MHz Repeater</svrinfoname>
>> >
>> >    <svrinfourl>https://www.broadcastify.com</svrinfourl>
>> >    <svrinfogenre>Amateur Radio</svrinfogenre>
>> >    <svrinfodescription>N5MBM 52.3500 MHz Repeater</svrinfodescription>
>> >    <svrinfobitrate>16</svrinfobitrate>
>> >    <svrinfochannels>1</svrinfochannels>
>> >    <svrinfosamplerate>22050</svrinfosamplerate>
>> >    <svrinfopublic>1</svrinfopublic>
>> > </ezstream>
>> >
>> >
>> > Does anyone have any idea where I went wrong?
>> > It's GOT to be something simple!
>> > I have had this particular stream running for years on and old radio
>> shack
>> > scanner piped into scannercast running on an old Windoze box I would
>> really
>> > like to retire.  I would rather just have the RasPi on the node stream
>> > right to it.
>> > Could it be something as simple as having the redirect a port forwarding
>> > rule from the old Windoze box to the Ras Pi?  I tried that and still
>> can't
>> > get it to work...
>> > I am sort of stumped at the moment...
>> >
>> > Bill - N5MBM
>> > _______________________________________________
>> >
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the arm-allstar mailing list