[arm-allstar] Node dropping packets

[Doug Crompton]

Also after reading that more carefully I guess the RX is at your end linked
from the mountaintop? If so you still need to look at simpleusb-tume-menu V
command and see what COS is doing at these drop outs.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, Jan 12, 2018 at 1:50 AM, "Steve Rogers via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have my node rf linked to the mountain top repeater and all works well
> except for I am getting dropped audio from that is received from connected
> nodes. I originally thought that I was getting some desense on the link
> receiver located at the repeater site. After digging deeper I find that is
> not the case. I can connect to a remote node, watch the telemetry in
> real-time (via the simpleusb-tune-menu) on my node as well as watching on
> supermon and see that when a user from a connected node is talking it will
> indeed "hiccup" for a lack of better words. When this happens my node will
> literally for just a split second unkey then key back up and resume like
> normal. This "hiccup" will also occur during the connect/disconnect
> messages. I have narrowed it down to the allstar hardware itself, but I am
> just not sure what specifically is causing the trouble. I have the PI on a
> wired connection, with current Hamvoip updates and an RA-35 interface from
> Kevin Custer (Repeater Builder). Just for fu
>  rther information, I have an IRLP node here also that is rf linked back
> to the repeater and it is not having any type of audio hiccups like I am
> describing with allstar.
>
> I will happily provide more details if needed.
> Any ideas?
>
> Thanks
> Steve
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>