[arm-allstar] vision impaired

[Buddy Brannan]

For the final authority, look at your /etc/asterisk/rpt.conf file (or the template file from which it was generated). If you still can't disconnect after determining the correct command, could be someof your tones are not decoding properly, either because of too much or not enough audio. 

--
Buddy Brannan, KB5ELV - Erie, PA
Mobile (preferred): (814) 431-0962
Phone: (814) 860-3194
Email: buddy at brannan.name
"We are all just walking each other home." 



> On Feb 25, 2018, at 9:13 AM, S. Turner via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Kevin, try *76 for disconnect all.
> 
> Thanks,
> 
> Steve
> 
>> On Feb 25, 2018, at 9:08 AM, Kevin Halton via arm-allstar <arm-allstar at hamvoip.org> wrote:
>> 
>> I am assisting a local ham who is vision impaired setup his first node. I am
>> having an issue with a few of the dtmf tones from ANY radio working
>> correctly. I cannot get the node to execute a disconnect all  via DTMF but I
>> can connect. I have tried *73 and *71. I have looked at the Allstarlink.org
>> site and it shows *71? Any ideas?
>> 
>> 
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org