[arm-allstar] usbradio

[Tom Eaton]

I am running 1.5rc4-14 and want to use usbradio and not simpleusb, I have
set it up but cannot get it to work. these is the files. Works fine in
simpleusb but when I change to usbradio radio-tune-menu will come up but it
shows no audio on rx and will not tx, I am trying to test on a working node
for a new rx only node that has no cos on receiver. Any help would be great.

Thanks
Tom KC4CBQ

[usb1999]

hdwtype=1
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=100.0
rxctcssfreqs=186.2
txctcssfreqs=186.2
;rxctcssoverride=0
carrierfrom=dsp
ctcssfrom=dsp
rxdemod=flat
txprelim=yes
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=0
invertptt=0
duplex=1
rxondelay=0
rxnoisefiltype=0
eeprom=0

#includeifexists custom/usbradio.conf




[1999] ; Change this to your assigned node number

; Channel Driver settings
; Define a channel driver to use and which
; interface within that channel driver
; To define a radioless node use the
; psuedo channel driver - rxchannel=dahdi/pseudo
rxchannel=Radio/usb1999
; Example usbradio channel driver
;rxchannel=SimpleUSB/usb
; Example simpleusb channel driver
;rxchannel=dahdi/pseudo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20180211/e0603e73/attachment.html>