[arm-allstar] Yeasu FT100D and Hamlib

[Edward Masarsky]

Doug,
FTM-100D is Yaesu mobile Fusion radio. Vhf/Uhf Fm rig. Not HF.
73 Ed
KB3IV



__________________________________
Sent from eM Client | www.emclient.com <http://www.emclient.com/get>

------ Original Message ------
From: "Doug Crompton via ARM-allstar" <arm-allstar at hamvoip.org>
To: "ARM Allstar" <arm-allstar at hamvoip.org>
Cc: "Doug Crompton" <wa3dsp at gmail.com>
Sent: 12/30/2018 8:23:19 PM
Subject: Re: [arm-allstar] Yeasu FT100D and Hamlib

>Hopefully someone will chime in on this. My research says that it can be
>done. If you google "FT100D hamlib
>" it appears there was work on it way back in 2003 but I see no specific
>listing in the supported rigs. There was talk that it was very similar to
>the FT817 which is in the list so many of the commands for that rig should
>work. It does not hurt to test it. If you only need frequency control anf a
>few other things it probably matches some other Yaesu rig.
>
>
>*73 Doug*
>
>*WA3DSP*
>
>*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>On Sun, Dec 30, 2018 at 6:44 PM "Martin Boroff via ARM-allstar" <
>arm-allstar at hamvoip.org> wrote:
>
>>  I am looking for anyone using Hamlib and a Yeasu FTM-100D. I am currently
>>  using a FTM100D with AllStarLink and just a sound card for audio and PTT
>>  function. I would like to add rigctl.
>>
>>  73, Marty WD9GYM
>>  _______________________________________________
>>
>>  ARM-allstar mailing list
>>  ARM-allstar at hamvoip.org
>>  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>  Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3 web page - http://hamvoip.org