[arm-allstar] 2nd Node

[Doug Crompton]

Chris,

  Make sure your

rxchannel=SimpleUSB/usb

is correct for BOTH nodes in rpt.conf. The /usb should match the name of
the stanza in simpleusb.conf for the radio you want to connect to. So if
the first node is  usb  and the second is usb2  in simpleusb.conf  then the
rxchannel needs to match those for the respective nodes.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Fri, Dec 21, 2018 at 10:27 PM "Chris Viningre via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I must be missing something when adding a 2nd node. I've done it many times
> but today I'm missing something. I imaged a new card. Changed the PI3B.
> Everything works well on 1 node but when I add the 2nd node it loop on
> restarting asterisk. Here is what error messages I got when this is
> happening.
>
> [Dec 21 19:42:52] WARNING[2181]: app_rpt.c:20913 rpt_master: rpt_thread
> restarted on node 46040
> [Dec 21 19:42:52] WARNING[2205]: chan_simpleusb.c:1291 _find_desc: could
> not find <usb2>
> [Dec 21 19:42:52] NOTICE[2205]: chan_simpleusb.c:2901 simpleusb_request:
> Device usb2 not found
> [Dec 21 19:42:54] NOTICE[2181]: app_rpt.c:20901 rpt_master: RPT thread
> restarted on 46040
>
>
> Chris Viningre WS5B
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> chrisviningre at gmail.com
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>