[arm-allstar] Message Playback following Timeout-Timer reset?

[Chuck]

Obviously the word "reset" can be replaced with any word or phrase desired.
But this does do what he asked for.
It plays that message when the long winded user who timed out the repeater
unkeys.
It does not play the message when a linked in user unkeys after timeout
because they would not hear localplay anyway.
But just a slight change (2 additional variables) to it and it could also
play when the linked in long winded user unkeys after a timeout.
Try it before deciding that it does not work!  It does work.
Chuck

On Thu, Dec 13, 2018 at 10:23 AM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Chuck,
>
>   Yes we know well about events we use them all the time but that was not
> what he was asking. He wanted specific playback after timeout. There is no
> event for that.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Thu, Dec 13, 2018 at 11:20 AM "Chuck via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > It can be done in with the event subsystem (capability has been there
> for a
> > very long time) and some tiny shell scripts.
> > I have it working on my system.
> > This is more than what is necessary, but I also have other scripts that
> use
> > these temp files.
> > There are probably several other better ways to do this.
> >
> > ; the below 4 lines are in the events section of rpt.conf
> > /usr/local/bin/weunkey.sh = s|f|RPT_RXKEYED
> > /usr/local/bin/wekey.sh = s|t|RPT_RXKEYED
> > /usr/local/bin/wetxunkey.sh = s|f|RPT_TXKEYED
> > /usr/local/bin/wetxkey.sh = s|t|RPT_TXKEYED
> >
> >
> > cat wekey.sh
> > #!/bin/sh
> > touch /tmp/key27383
> >
> >
> > cat wetxkey.sh
> > #!/bin/sh
> > touch /tmp/txkey27383
> >
> >
> > cat wetxunkey.sh
> > #!/bin/sh
> > rm -f /tmp/txkey27383
> >
> >
> > cat weunkey.sh
> > #!/bin/sh
> > rm -f /tmp/key27383
> > if [ ! -f /tmp/txkey27383 ]
> >         then {
> >         /usr/bin/asterisk -rx "rpt localplay 27383 ha/reset"
> > } fi
> >
> > That's all it takes.  Be sure to do a "rpt reload" or restart asterisk
> > after editing the rpt.conf file.
> > Also create the scripts and make them executable before adding the lines
> to
> > the rpt.conf file.
> >
> >
> >
> > On Thu, Dec 13, 2018 at 4:12 AM "Randy Neals via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Cool, thanks!
> > >
> > > On Wed, Dec 12, 2018 at 9:01 PM David McGough <kb4fxc at inttek.net>
> wrote:
> > >
> > > >
> > > > Randy,
> > > >
> > > > Agreed, that would be a useful feature. I'll put it on the list. That
> > > > actually probably isn't too hard to implement.
> > > >
> > > >
> > > > 73, David KB4FXC
> > > >
> > > >
> > > > On Wed, 12 Dec 2018, "Randy Neals via ARM-allstar" wrote:
> > > >
> > > > > We would like to playback a message on reset of tx_timeoute timer.
> > > > >
> > > > > I didn't see an obvious way to do that, and didn't uncover anything
> > > with
> > > > a
> > > > > search of this list.
> > > > > Hoping someone has figured this out and might throw a clue our
> way...
> > > > >
> > > > > The use case is to play a message when a long-winded user releases
> > > their
> > > > > PTT, following expiry of the Time Out Timer. In hardware
> controllers
> > it
> > > > > might say "Time Out Timer Reset".
> > > > > Upon release of PTT, this tells the user that they timed out the
> > > repeater
> > > > > and they will need to say part of their transmission again.
> > > > >
> > > > > Thanks,
> > > > > Randy, W3RWN
> > > > > Seattle, WA
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > >
> > > >
> > > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>