[arm-allstar] WiFi RPI3BP problem

[stanley stanukinos]

You need to download the new image while using the pie3. If memory serves me correct there are some updates specifically for it. 

Stan

Sent from my iPhone

> On Dec 4, 2018, at 4:19 AM, zvi.serlin--- via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Hi,
> 
> A major problem with sea air and humidity lead to the demise of a 10A power module (copper track dissolved) and
> failure of the USB ports on my RPI. Eventually the PSU was repaired and a RPI3BP (PI3 Mod B) arrived, I plugged in my original
> SD card and proceeded to check connections. Wired worked fine, wifi did not, so burned a new SD card and started again with
> the same results. My first assumption was that I had received a faulty RPI so I inserted an SD card for a KODI streamer and tried again.
> This time the wifi connection worked perfectly and I was able to watch streamed video. So I know the wifi port works.
> 
> Setting up the RPI again for Allstar ipconfig shows that wlan0 has picked up an ip address and scanning the router ports showed
> that the ip was there as well. In the meantime I am running allstar on an older RPI32 which works fine. Any ideas as to the
> possible cause of the problem?
> 
> Many thanks
> 
> Zvi Serlin
> 4X1ZS 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org