[arm-allstar] Irlp on pi3 AllSstar

[Glenn]

"Tony Ross via ARM-allstar" wrote:
> On 12/2/18 11:38 AM, "ka5tkn--- via ARM-allstar" wrote:
>> ... After install, ck the IRLP status page it showed stn3702 
>> idle..Now the help needed.  I have found that I have only been able 
>> to connect to one node...All other attempts I get 'connection 
>> failed'.  I have no idea what to check.Any suggestion Glenn
>  /var/log/asterisk/messages is always a good thing to check. Use admin 
> menu 9 to get a root shell, then "tail -f -n 100 
> /var/log/asterisk/messages" to view in realtime as you attempt a 
> connection, then eventually <ctrl>-c to quit.
>
> A successful connection to your "one node" and an unsuccessful attempt 
> to any other nodes are worthy of comparison. If you see anything 
> questionable then a copy-n-paste reply will help others to help you.
>
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
Sun Dec 02 19:42:25 CST 2018 [irlp_fullreset] Full Reset completed.
Sun Dec 02 19:42:25 CST 2018 [call] IRLP call initiated to stn3635 W5ICF-L
Sun Dec 02 19:42:25 CST 2018 [call] The nodes IP is determined to be 
98.195.212.182
Sun Dec 02 19:42:26 CST 2018 [control] W5ICF-L stn3635 reply connectok ADPCM
Sun Dec 02 19:42:26 CST 2018 [on] stn3635 ADPCM 98.195.212.182
Sun Dec 02 19:42:49 CST 2018 [end] Node Disconnect from stn3635 W5ICF-L
Sun Dec 02 19:42:49 CST 2018 [dropcall] Call dropped.

Sun Dec 02 19:45:18 CST 2018 [irlp_fullreset] Full Reset completed.
Sun Dec 02 19:45:18 CST 2018 [call] IRLP call initiated to stn3639 W5LOS-L
Sun Dec 02 19:45:18 CST 2018 [call] The nodes IP is determined to be 
72.183.161.21
Sun Dec 02 19:45:19 CST 2018 [control] W5LOS-L stn3639 reply connectok 
UNCOMP
Sun Dec 02 19:45:19 CST 2018 [on] stn3639 UNCOMP 72.183.161.21
the only difference I see is the call dropped gives a connectok ADPCP and
the connect node gives a conectok UNCOMP.. dont know what the means?
Glenn K5COD