[arm-allstar] IAXRPT

[Luc Drolet VE2LUQ]

Hello Doug,

OK, it will soon have an update and it will take into account the private node that will be fine, 
so I will wait to make the change of my last node for allstar

Thank you very much appreciated
have a nice week end
Luc
VE2LUQ

> Le 31 août 2018 à 13:57, Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> a écrit :
> 
> Luc,
> 
> From what I gather you are talking about private node numbers. These are
> node number between 1000 and 1999 within the Allstar network. They are not
> officially assigned but may be assigned within a group. This is often used
> in repeater systems to connect sites which would not normally be part of
> the public Allstar network. Private node numbers are not registered with
> Allstar and no private routing information is part of the Allstar
> registration system. Private nodes need to be manually routed using the
> [nodes]  stanza in rrpt.conf. This is something that is done on an
> individual basis by the user or group. Private nodes are compatible within
> the Allstar network but not directly connectible without specific routing
> information.
> 
> As a side note to this the hamvoip registration system which will be coming
> online for all very soon will be able to privately register private node
> groups making it much easier to maintain routing continuity for private
> networks.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> On Fri, Aug 31, 2018 at 10:45 AM "Luc Drolet VE2LUQ via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Thank you for your help,
>> 
>> my users do not want me to change the last node for allstar, because it
>> likes to see connected nodes, and I understand it
>> if you can help me
>> 
>> 
>> 
>> Thank you and good day
>> 
>> 73’s
>> Luc
>> 
>>> Le 31 août 2018 à 09:15, Luc Drolet VE2LUQ via ARM-allstar <
>> arm-allstar at hamvoip.org> a écrit :
>>> 
>>> Hello everyone,
>>> 
>>> Previously, I used the Xelatec system and now I only have one NODE to
>> transfer to Allstar,
>>> but I would like to have my NODE numbers with IAXRPT like Xelatec, is it
>> possible?
>>> 
>>> before changing the last system for allstar
>>> 
>>> 
>>> 
>>> 
>>> 
>>> Merci de votre aide,
>>> 
>>> mes utilisateurs ne veulent pas que je change le dernier nœud pour
>> allstar, car il aime voir les nœuds connectés, et je le comprends
>>> si vous pouvez m'aider
>>> 
>>> Merci et bonne journée
>>> 
>>> 73’s
>>> Luc
>>> VE2LUQ
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
>> _______________________________________________
>> 
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org