[arm-allstar] Using Icom 2AT for node

[Doug Crompton]

I believe the information you need is in this howto -

http://www.repeater-builder.com/acc/acc-fc-1.html

Scroll down and read about the IC2 COS.   The IC3 and IC4 would be the
same. These  like many handhelds key the power to the audio output stage
with receive signal thus saving power. This is the same way we pick up COS
for the Baofengs.

You do not need disc audio for simpleusb. Just use speaker and mic
connections and no de or pre-emphasis.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Aug 26, 2018 at 8:24 PM "Peter Dahl via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have a couple of IC 3AT’s and would be interested in the same
> information.
>
> Peter - WA7FUS
>
>
> > On Aug 26, 2018, at 2:02 PM, Jay Urish via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > Team,
> >
> > I have a 2AT that I would like to use for a lunchbox node. I know where
> I can tap for discriminator and mic and ptt / cor if I open the radio up.
> Can I just use usbradio to handle all that and just use my top mic/ear
> connections?
> >
> > Has anybody used a 2at for this?
> >
> >
> > jay
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org