[arm-allstar] Zoiper Problem: Extension Doesn't Exist

[Mark Johnston]

Did you run the asterisk -rx "iax2 reload" and
asterisk -rx "dialplan reload"

That is with the " 's

And your context is wrong?

Should be k7ojl-zoiper

**** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub>
****

"Got Root?"

How many software engineers does it take to change a light bulb?
*None. It's a hardware problem.*

The best way to accelerate a computer running Windows is at 9.81 m/s².

*"I get paid to support Windows, I use Linux to get work done."*



On Sun, Aug 19, 2018 at 10:02 AM "Eric Harrison via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Yes iaxrpt is  by far the best choice even though I made zoiper work with
> sip, it was not with it's problems.
> Eric
> N7JYS
>
> Sent from Yahoo Mail on Android
>
>   On Sun, Aug 19, 2018 at 10:47 AM, Doug Crompton via arm-allstar<
> arm-allstar at hamvoip.org> wrote:   Roland,
>
>  I don't have an answer for you on Zoipier but other might chime in. If you
> have an Androind phone iaxrpt would be a better choice. Also you broadcast
> your PW for Zoipier so I would change that.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sun, Aug 19, 2018 at 11:15 AM, "Roland Smith via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have just set up Zoiper and have successfully registered. However, when
> > attempting to dial the node number (42284) Zoiper says "No such extension
> > (3)". The CLI client says "Rejected connect attempt from 10.0.0.236,
> > request '42284 at zoiper' does not exist".
> >
> > My Zoiper config (which reports "Registration Status: OK")
> > Account name: k7ojl Internal
> > Server: 10.0.0.21:4569
> > Username: k7ojl-zoiper
> > Password: **********
> > Caller ID: K7OJL
> >
> > The setup in IAX is:
> > [k7ojl-zoiper]
> > user=k7ojl-zoiper
> > type=friend
> > context=zoiper
> > auth=md5
> > secret=Nina*1996
> > host=dynamic
> > disallow=all
> > allow=ulaw
> > allow=g726aal2
> > allow=gsm
> > transfer=no
> > callerid="K7OJL"
> >
> > I've added the following to extensions.conf:
> > [k7ojl-zoiper]
> > exten => 42284,1,answer()
> > exten => 42284,n,Playback(rpt/node)
> > exten => 42284,n,Playback(digits/4)
> > exten => 42284,n,Playback(digits/2)
> > exten => 42284,n,Playback(digits/2)
> > exten => 42284,n,Playback(digits/8)
> > exten => 42284,n,Playback(digits/4)
> > exten => 42284,n,Playback(rpt/connected)
> > exten => 42284,n,rpt(42284|Pv)
> >
> > I've obviously missed something simple....
> >
> > Thanks!
> > --
> > Roland Smith K7OJL
> > Blog: www.rnsmith.com
> > Also: k7ojl.com
> > Cell: (435) 849-1946
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org