[arm-allstar] APRS

[Luc Drolet VE2LUQ]

Hello to you ,

I use a private node
for your information, I do not know if it's important

Yes I disconnect the 5 volts and reconnect after 5 seconds

Thank you for your help
Luc


> Le 18 août 2018 à 18:39, Luc Drolet VE2LUQ via arm-allstar <arm-allstar at hamvoip.org> a écrit :
> 
> Hello James,
> 
> I put
> 
> load = app_gps.so
> [global]
> 
> and I waited 15 minutes to be sure to see on the web page aprs.fi if I can see the repeater
> and nothing is displayed
> 
> Luc
> VE2LUQ
> 
>> Le 18 août 2018 à 18:10, James Hause via arm-allstar <arm-allstar at hamvoip.org> a écrit :
>> 
>> I think I see your problem.  You need to change   in MODULES.CONF "noload =
>> app_gps.so",
>> to load=app.gps.so.   Having the noload tells it no NOT load, you want it
>> to load.
>> 
>> On Sat, Aug 18, 2018 at 4:21 PM, "Luc Drolet VE2LUQ via arm-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>> 
>>> Hello to you,
>>> 
>>> With asterisk I think we can have a tag placed on the APRS.FI site of the
>>> repeater position
>>> I added the file using the ssh mode of the raspberry PI
>>> 
>>> and I can not see my position on the APRS.FI website
>>> in addition I also put in MODULES.CONF "noload = app_gps.so"
>>> 
>>> ;——————————
>>> ; Configuration for app_gps
>>> ;
>>> [general]
>>> 
>>> call = ve2luq; callsign (including SSID) for APRS purposes
>>> password = xxxxxxxxxxxx; Password for APRS-IS server
>>> comment = AllStar Node 1400; Text to be displayed with this station
>>> server = rotate.aprs2.net; APRS-IS server to report information
>>> port = 14580; port on server to send data
>>> interval = 600; Beacon interval in seconds
>>> icon = r; A CAR (default) Icon for the APRS display (see below)
>>> comport = / dev / ttyS0; Serial port for GPS receiver
>>> baudrate = 4800; Baud rate for GPS receiver
>>> debug = y; set this for debug output
>>> freq = 145.130; Display Frequency of station
>>> tone = 100.0; CTCSS tone of station (0.0 for none)
>>> lat = 46.1344359; Fixed latitude in decimal degrees
>>> lon = -71.2263340; Fixed (default) longitude in decimal degrees
>>> elev = 123.4; Elevation of Antenna in Meters (* NOT * HAAT)
>>> power = 1; Power level (see below)
>>> height = 2; Antenna Height in HAAT (see below)
>>> gain = 3; Antenna Gain (see below)
>>> dir = 0; Antenna Direction (see below)
>>> ;--------------------------
>>> 
>>> 
>>> I can not see where my mistake is
>>> I think it must work to see our position of our repeaters on the APRS.FI
>>> website
>>> 
>>> Thank you and have a nice evening to you all
>>> 
>>> Luc
>>> VE2LUQ
>>> _______________________________________________
>>> 
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org