[arm-allstar] APRS

[David McGough]

Did you restart Asterisl?


On Sat, 18 Aug 2018, "Luc Drolet VE2LUQ via arm-allstar" wrote:

> Hello James,

I put

load = app_gps.so
[global]

and I waited 15 minutes to be sure to see on the web page aprs.fi if I can see the repeater
and nothing is displayed

Luc
VE2LUQ

> Le 18 août 2018 à 18:10, James Hause via arm-allstar <arm-allstar at hamvoip.org> a écrit :
> 
> I think I see your problem.  You need to change   in MODULES.CONF "noload =
> app_gps.so",
> to load=app.gps.so.   Having the noload tells it no NOT load, you want it
> to load.
> 
> On Sat, Aug 18, 2018 at 4:21 PM, "Luc Drolet VE2LUQ via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Hello to you,
>> 
>> With asterisk I think we can have a tag placed on the APRS.FI site of the
>> repeater position
>> I added the file using the ssh mode of the raspberry PI
>> 
>> and I can not see my position on the APRS.FI website
>> in addition I also put in MODULES.CONF "noload = app_gps.so"
>> 
>> ;——————————
>> ; Configuration for app_gps
>> ;
>> [general]
>> 
>> call = ve2luq; callsign (including SSID) for APRS purposes
>> password = xxxxxxxxxxxx; Password for APRS-IS server
>> comment = AllStar Node 1400; Text to be displayed with this station
>> server = rotate.aprs2.net; APRS-IS server to report information
>> port = 14580; port on server to send data
>> interval = 600; Beacon interval in seconds
>> icon = r; A CAR (default) Icon for the APRS display (see below)
>> comport = / dev / ttyS0; Serial port for GPS receiver
>> baudrate = 4800; Baud rate for GPS receiver
>> debug = y; set this for debug output
>> freq = 145.130; Display Frequency of station
>> tone = 100.0; CTCSS tone of station (0.0 for none)
>> lat = 46.1344359; Fixed latitude in decimal degrees
>> lon = -71.2263340; Fixed (default) longitude in decimal degrees
>> elev = 123.4; Elevation of Antenna in Meters (* NOT * HAAT)
>> power = 1; Power level (see below)
>> height = 2; Antenna Height in HAAT (see below)
>> gain = 3; Antenna Gain (see below)
>> dir = 0; Antenna Direction (see below)
>> ;--------------------------
>> 
>> 
>> I can not see where my mistake is
>> I think it must work to see our position of our repeaters on the APRS.FI
>> website
>> 
>> Thank you and have a nice evening to you all
>> 
>> Luc
>> VE2LUQ
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org