[arm-allstar] Bindport Question

Roger Coudé ve2dbe at yahoo.ca
Sun Aug 5 15:04:05 EDT 2018


Since your node 48656 is not using the default 4569,you must declare port 4570 in your local path
48656:
[nodes]
48656 = radio at 127.0.0.1/48656,NONE
48166 = radio at 192.168.1.201:4569,48166,NONE
1999 = radio at 127.0.0.1/1999,NONE
Sould be:
48656:
[nodes]
48656 = radio at 127.0.0.1:4570/48656,NONE
48166 = radio at 192.168.1.201:4569,48166,NONE
1999 = radio at 127.0.0.1:4570/1999,NONE

Roger

      De : Mike Besemer via arm-allstar <arm-allstar at hamvoip.org>
 À : 'ARM Allstar' <arm-allstar at hamvoip.org> 
Cc : Mike Besemer <mwbesemer at cox.net>
 Envoyé le : Dimanche 5 août 2018 14h37
 Objet : Re: [arm-allstar] Bindport Question
   
Here's the entries from iax.conf:

48166: 
[general]
bindport=4569
bindaddr=0.0.0.0

48656:
[general]
bindport=4570
bindaddr=0.0.0.0  

Everything seems to be working except I can't get both nodes to connect to
each other.  I have the following entries in rpt.conf:

48166:
[nodes]
48166 = radio at 127.0.0.1/48166,NONE
48656 = radio at 192.168.1.202:4570,48656,NONE
1999 = radio at 127.0.0.1/1999,NONE

48656:
[nodes]
48656 = radio at 127.0.0.1/48656,NONE
48166 = radio at 192.168.1.201:4569,48166,NONE
1999 = radio at 127.0.0.1/1999,NONE

Just wondering if these two things were related.

Mike



-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: Sunday, August 5, 2018 2:26 PM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Bindport Question

Mike,

It looks OK here but keep in mind that you have the 166 node in remote base
mode. Does it really need to be? If not turn it off at allstarlink.org in
the node info. Recheck it is changed in iax.conf and correct for both
servers.

# dns-query 48656
+OK|radio at 174.78.199.164:4570/48656,174.78.199.164

# dns-query 48166
+OK|radio at 174.78.199.164:4569/48166,174.78.199.164,y


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Aug 5, 2018 at 2:02 PM, "Mike Besemer via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Just getting things set up on my second node and noticed something that
has
> that has me puzzled.
>
> My nodes are running inside the same network, so the servers at
> allstarlink.org are set to different ports.
>
> 48166 = 4569
> 48656 =4570
>
> I have verified that this is correct both on the allstarlink server
> configuration page and in iax.conf
>
> lsnodes for 48166 reports correctly as follows:
> Host: 67.215.233.178:4569
> Node: 48166
> State: Registered
>
> What has me confused is that lsnodes for 48656 reports the SAME bindport
as
> follows:
> Host: 67.215.233.178:4569
> Node: 48656
> State: Registered
>
> Seems like there was a thread about a similar question within the past
week
> or so, but never saw the final answer.
>
> Mike
> WM4B
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org


   


More information about the arm-allstar mailing list