[arm-allstar] Bindport Question

[Doug Crompton]

Mike,

 At first glance that looks OK. You need to open the asterisk client in a
window for each server and see what possible errors you get on each one
when you try to connect to the other. When you try to connect do you get a
connection failed? or just a beep? Give me some feedback on what you are
seeing if you don't get it going.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sun, Aug 5, 2018 at 2:35 PM, "Mike Besemer via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Here's the entries from iax.conf:
>
> 48166:
> [general]
> bindport=4569
> bindaddr=0.0.0.0
>
> 48656:
> [general]
> bindport=4570
> bindaddr=0.0.0.0
>
> Everything seems to be working except I can't get both nodes to connect to
> each other.  I have the following entries in rpt.conf:
>
> 48166:
> [nodes]
> 48166 = radio at 127.0.0.1/48166,NONE
> 48656 = radio at 192.168.1.202:4570,48656,NONE
> 1999 = radio at 127.0.0.1/1999,NONE
>
> 48656:
> [nodes]
> 48656 = radio at 127.0.0.1/48656,NONE
> 48166 = radio at 192.168.1.201:4569,48166,NONE
> 1999 = radio at 127.0.0.1/1999,NONE
>
> Just wondering if these two things were related.
>
> Mike
>
>
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, August 5, 2018 2:26 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Bindport Question
>
> Mike,
>
> It looks OK here but keep in mind that you have the 166 node in remote base
> mode. Does it really need to be? If not turn it off at allstarlink.org in
> the node info. Recheck it is changed in iax.conf and correct for both
> servers.
>
> # dns-query 48656
> +OK|radio at 174.78.199.164:4570/48656,174.78.199.164
>
> # dns-query 48166
> +OK|radio at 174.78.199.164:4569/48166,174.78.199.164,y
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sun, Aug 5, 2018 at 2:02 PM, "Mike Besemer via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Just getting things set up on my second node and noticed something that
> has
> > that has me puzzled.
> >
> > My nodes are running inside the same network, so the servers at
> > allstarlink.org are set to different ports.
> >
> > 48166 = 4569
> > 48656 =4570
> >
> > I have verified that this is correct both on the allstarlink server
> > configuration page and in iax.conf
> >
> > lsnodes for 48166 reports correctly as follows:
> > Host: 67.215.233.178:4569
> > Node: 48166
> > State: Registered
> >
> > What has me confused is that lsnodes for 48656 reports the SAME bindport
> as
> > follows:
> > Host: 67.215.233.178:4569
> > Node: 48656
> > State: Registered
> >
> > Seems like there was a thread about a similar question within the past
> week
> > or so, but never saw the final answer.
> >
> > Mike
> > WM4B
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>