[arm-allstar] Playnews-0.11

[Doug Crompton]

Lloyd,

 I am sure there is an answer to that as there are some on here using that
controller. You know you could use Allstar as the controller and get rid of
the RC210?! You then gain the ability to have unlimited ports (servers) and
SW you can control. Just sayin...


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Apr 30, 2018 at 10:25 PM, "Lloyd Duck via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug,
>
> Thank you, I guess I'm not passing good dtmf codes from the repeater
> through an RC210 controller into the node. I ran Asterisk CLI client to see
> the dtmf codes and I only see this. Thinking I have something set wrong.
>
> -- Received OK from Echolink server server3.echolink.org
> -- Hungup 'DAHDI/pseudo-937225823'
> -- Hungup 'DAHDI/pseudo-2082242416'
> w5aw*CLI>
>
> I'm able to do *976 and click on dtmf from Supermon and it works, but not
> dtmf from a radio.
>
> On Apr 29, 2018, at 10:10 PM, ""Doug Crompton via arm-allstar"" <
> arm-allstar at hamvoip.org> wrote:
>
> Lloyd,
>
> You can't start the script with the NOW command as it requires a key press
> to start. You could go in and eliminate the key press start in the script
> for the NOW option. Commenting the "read -n 1" line by placing a # before
> it should solve your problem.
>
> echo "$NEWSTYPE news will start $TIME and use $MODE $MODETYPE mode on node
> - $NODE"
> echo -n "Press any key to start news..."
> read -n 1
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
> On Sun, Apr 29, 2018 at 10:26 PM, "Lloyd Duck via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>
> Doug or anyone,
>
> I'm having trouble playing Amateur Radio Newsline by using dtmf, it never
> starts playing.
>
> 976=cmd,/etc/asterisk/local/playnews-0.11 ARN now 42449 G &> /dev/null
> 2>&1 ;Newsline *976
>
> I've been able to run it using crontab and from the command line with
> ./playnews_0.11 ARN now 42449.
>
> With the command line has a part where the script stop till you "press any
> key to start news".
>
> else
>
> echo "$NEWSTYPE news will start $TIME and use $MODE $MODETYPE mode on node
> - $NODE"
> echo -n "Press any key to start news..."
> read -n 1
> fi
>
> Do I need to make a change to the script so I can use dtmf to start it?
>
> Lloyd
> W5LND
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org