[arm-allstar] Bind port

[Chris Zenchenko]

Yes, as indicated the show comes back with the node number but the wrong
port.
Check_reg comes back with er|not found.
I set the new port over a week ago and looking at the server config screen
on allstar shows it as the new port.
Do I have to download a new config from allstarlink.org?
I didn't do that because I assumed that there was no local place to put it.
I do get dns_query results as well as the pings I mentioned.
I've rebooted about 100 times in the last week so restarting isn't an issue.
Node numbers:
41822 and 42392


-----Original Message-----
From: arm-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
Crompton via arm-allstar"
Sent: Saturday, April 28, 2018 6:20 PM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Doug Crompton <wa3dsp at gmail.com>
Subject: Re: [arm-allstar] Bind port

Chris,

 It looks like you have done everything right. If you bring up the asterisk
client and do  'iax2 show registry'  what does it say?  You can also run
check_reg.sh at the Linux prompt.

You will not get an rpt_extnodes file unless you are registered.

I would recheck that your servers port is set correctly at allstarlink.
Also when you change the bind port in iax.conf you need to restart asterisk.

What is your node number?

Sometimes the registration server gets confused. Try shutting down for 10
minutes or so and then restart and see if it registeres.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*





On Sat, Apr 28, 2018 at 6:36 PM, "Chris Zenchenko via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I've reached the end of my ability to solve the problem of changed bind
> port.
> AT&T forced me to change from my old DSL network to a slightly newer
adsl2+
> network they call high-speed internet.
> Well that got me a gateway and trashed my network.
> With DMZ active to my old router everything is sort of working but not
> allstar.
> Browsing says that the gateway traps the 4569 port because even though I
> don't have voip service I might want it.
> So I did the following:
> Changed bind port in iax.conf to 4559.
> On allstar.org changed my server setting to reflect the 4559.
> Confirmed by watching my node on the site that it comes up and shows
key-up
> and connections to my secondary node here behind the firewall.
> However when I run the diag it says there is no rpt_extnodes file in /tmp.
> When I sign in to the asterisk panel and show registry it shows the old
> port
> 4569 and says not registered.
> If I manually run rc.updatenodelist it just hangs.
> I can ping the register.allstarlink.org.
> I can ping google.
> I can confirm that my router is configured with the correct port forward
> since I just expanded the range to include 4550 through 4570, just in
case.
> So what am I missing?
> What other files need to know about the changed port?
> HELP!!!
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org