[arm-allstar] BCD Control

[Eric Harrison]

Doug, I am using the latest and greatest most up to date software on a pi3 utilizing the GPIO Pins  

In stanza 42408  I have this command for every channel i use.
C701=cmd,/usr/local/sbin/bcd_control_pi.sh 1 42408 ect.
C716=cmd,/usr/local/sbin/bcd_control_pi.sh 16 42408
My understanding of this command is if you don't specify the node it will defualt to the first Node configured.
And if you do specify with a node number regardless of which node stanza you have it under it should execute based 
on  the node in the command,  just like the  /usr/local/sbin/sayip.sh <Node> command works. It doesn't  matter what node stanza it is under. Changing thenode number at the end of this command sends it to that Node that is configured.

 Eric (N7JYS) Marshall's Communications

      From: Doug Crompton via arm-allstar <arm-allstar at hamvoip.org>
 To: ARM Allstar <arm-allstar at hamvoip.org> 
Cc: Doug Crompton <wa3dsp at gmail.com>
 Sent: Tuesday, April 10, 2018 10:30 AM
 Subject: Re: [arm-allstar] BCD Control
   
Eric,

I assume you are using the bcd_control_usb_fob.sh in the current
distribution of V1.5? There is no bcd_control.sh???

You need to define the GPIO commands in each stanza in simpleusb.conf - it
basically would be the same in each stanza. The script sends the command to
the defined node and unless there is a bug in cop,61 it should work. Do you
have it defined in both stanzas in simpleusb.conf? I have not tested with
multiple nodes on one server but it should work.

If you are using the Pi version then this would not work. You would have to
modify the code to use different GPIO ports for each node. Which actual
script are you using?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*






On Tue, Apr 10, 2018 at 10:32 AM, "Eric Harrison via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have started to use the bcd_control_pi.sh script and have notice no
> mater what node number I attache to the endof the command the ptt and voice
> are sent to $NODE1. I have two nodes configured on one pi and have
> verifiedboth node are functioning correctly. Running
> /usr/local/sbin/sayip.sh 42408 sends it to 42408 and
> /usr/local/sbin/sayip.sh 42409  sends it to 42409.
> If is issue the cmd.,  /usr/local/sbin/bcd.control.sh 1 42408, it sends
> the ch.1 command to 42408. If I issue the cmd., /usr/local/sbin/bcd.
> control.sh 1 42409, it still sends the ch.1 command to 42408.
>
> Guessing a bug or am I missing something in setup?
>
>  Eric (N7JYS) Marshall's Communications
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org