[arm-allstar] Rpt.conf file

[Les Bradshaw]

Doug,

This is what I have in the Rpt.conf file

duplex=1
startup_macro=*7344772#
startup_macro=*52
node_lookup_method=dns

I don’t think it is setup right..

Les

Sent from Mail for Windows 10

From: Doug Crompton via arm-allstar 
Sent: Tuesday, April 10, 2018 10:06 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Rpt.conf file

Les,

 If you uncommented any of the additional lines like A1 the DTMF is just
*A1 - most radios have A, B, C, D - the baofeng is the top row across ABCD
when the radio is keyed. If you have a radio that does not have those keys
you can change the command say instead of A1 it could be 881.

If you are having problems with it connecting at boot you must have both
ends using the beta DNS. It would also help to use a *73 permanent connect
and not just *3.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Apr 10, 2018 at 10:49 AM, "Les Bradshaw via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Doug  I am trying to set my mobile node to connect to my home node at boot
> up, also I have uncommitted the ;A1=cmd ......... but not sure how to use
> it on my key pad. Can you help me with this?
> Thanks, N5LMBLes
>
>
> Sent from Yahoo Mail for iPad
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org