[arm-allstar] favorites.ini

[Doug Crompton]

Justin,

 And to be specific about the node numbers you mentioned -

    1) Connect 45444 to 46259
    2) Connect 45444 to 1002
    3) Connect 46259 to 89335

Lines for each one of these could be defined in favorites.ini but unless
you were actually connected to the source server 45444 or 46259 it would
not work. If 45444 and 46259 were on different servers then you should
segregate them as I suggested.

all on one server -

[45444]
label[] = "Connect Allstar 4259"
cmd[] = "rpt cmd %node% ilink 3 46259"
label[] = "Connect Allstar 1002"
cmd[] = "rpt cmd %node% ilink 3 1002"
label[] = "Connect 89335"
cmd[] = "rpt cmd %node% ilink 3 89335"

If 45444 and 46259 were not on the same server then you would want to do it
this way.

[45444]
label[] = "Connect Allstar 4259"
cmd[] = "rpt cmd %node% ilink 3 46259"
label[] = "Connect Allstar 1002"
cmd[] = "rpt cmd %node% ilink 3 1002"

[46259]
label[] = "Connect IRLP 9335"
cmd[] = "rpt cmd %node% ilink 3 89335"



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*










On Sat, Apr 7, 2018 at 3:44 PM, "Justin Reed via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi again,
>
> I'm trying to setup a favorite in /supermon/favorites.ini that would:
>     1) Connect 45444 to 46259
>     2) Connect 45444 to 1002
>     3) Connect 46259 to 89335
>
> I understand the basic syntax of an individual command, but I'm having
> trouble figuring out how to add more than one command.
>
> Thanks,
> Justin
> NV8Q
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org