[arm-allstar] Split site repeater
kd0q at traer.net
Sat Sep 23 14:57:48 EST 2017
Both the receiver and the transmit/repeater controller nodes are on the
same local network and have static, but not public, IP addresses. I guess
the connection between them could (should?) be private.
The transmit/repeater controller node will also have a transceive
connection to an external Allstar node over the internet.
The repeater will only have audio from the receiver over the Allstar link.
Glenn - KD0Q
On Sat, Sep 23, 2017 at 11:47 AM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> A couple of questions. Is this to be a private connection? Are you just
> using Allstar for the remote link? Do you have any other RF coming in to
> the repeater directly or is this just a receiver connected by Allstar via
> Internet to a transmitter? Do you want to connect to other Allstar nodes
> besides the remote receiver?
> Do you have static IP addresses or Dyndns at either or both ends?
> *73 Doug*
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> On Sat, Sep 23, 2017 at 11:18 AM, "KD0Q-Glenn via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> > I'm working on a split site repeater with a node at the receiver linked
> > another node acting as the controller at the transmitter.
> > Are there any special configurations I need to make? Any other
> > suggestions or gotchas?
> > Thanks, Glenn - KD0Q
> > _______________________________________________
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the arm-allstar