[arm-allstar] Split site repeater

[Doug Crompton]

Glenn,

  A couple of questions. Is this to be a private connection? Are you just
using Allstar for the remote link? Do you have any other RF coming in to
the repeater directly or is this just a receiver connected by Allstar via
Internet to a transmitter? Do you want to connect to other Allstar nodes
besides the remote receiver?

Do you have static IP addresses or Dyndns at either or both ends?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sat, Sep 23, 2017 at 11:18 AM, "KD0Q-Glenn via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I'm working on a split site repeater with a node at the receiver linked to
> another node acting as the controller at the transmitter.
>
> Are there any special configurations I need to make?  Any other
> suggestions or gotchas?
>
> Thanks, Glenn - KD0Q
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org