[arm-allstar] arm-allstar Digest, Vol 40, Issue 18 message 6
Doug Crompton
wa3dsp at gmail.com
Sat Sep 16 23:54:37 EST 2017
Don,
OK a few points. First you have to determine if you are being assigned an
IP address. When Allstar boots it says the IP address to a radio. If you do
not have a radio connected you can go to the main menu and select item 9 -
select bash shell. You are then at the linux prompt - type in
ip a
Under the inet heading in wlan0 you should see an IP address. If it is a
valid IP address on your LAN (not 127.0.0.1) then you are being assigned an
IP address. If that is the case type
ping ucsd.edu
You should get responses. If so type control c to exit.
now type exit and go back to the main menu. Select item 11 to enter the
asterisk client. At the client type
iax2 show registry
It should show that your node is registered. type exit to leave the client.
Again select item 9 bash shell. At the Linux prompt type
ls /tmp
You should see a file called rpt_extnodes
Tell me where these items went wrong or not and I can further diagnose.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Sun, Sep 17, 2017 at 12:35 AM, "ku6v via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Doug,
> I am using a WiFi provider for ISP. Ubiquity Rocket M5 radios. I don't have
> a speaker connected yet. I will do that in the morning. I assume no
> connection as when I disconnect the Ethernet cable and use the menu to look
> for upgrades I get a solid blue screen, no text, and then it returns to the
> menu. With the Ethernet connected I see text and then results in text form
> when the action is completed. I also do not see my Pi3 static address
> listed
> in the Asus wifi connected devices.
>
> 73
> Don
> KU6V
>
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> arm-allstar-request at hamvoip.org
> Sent: Saturday, September 16, 2017 9:22 PM
> To: arm-allstar at hamvoip.org
> Subject: arm-allstar Digest, Vol 40, Issue 18
>
> Send arm-allstar mailing list submissions to
> arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
> arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
> arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of arm-allstar digest..."
>
>
> Today's Topics:
>
> 1. Re: Simplex Mode 1 Issues (Justin Reed)
> 2. Re: Simplex Mode 1 Issues (Justin Grigg)
> 3. Re: Simplex Mode 1 Issues (Eric Harrison)
> 4. Re: Simplex Mode 1 Issues (Doug Crompton)
> 5. Re: Simplex Mode 1 Issues (Justin Grigg)
> 6. Re: arm-allstar Digest, Vol 40, Issue 17 message 6 (ku6v)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 16 Sep 2017 20:22:48 -0500
> From: Justin Reed <celltech161 at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Simplex Mode 1 Issues
> Message-ID: <02ED32D2-E028-47DF-94B9-ADA6469A4E32 at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> This is exactly how it should work.
>
> You want 0 for a repeater remote base.
>
> You can use 1 for a simplex base station if you want all the beeps.
>
> Regards,
> Justin
>
> > On Sep 16, 2017, at 7:25 PM, Justin Grigg via arm-allstar
> <arm-allstar at hamvoip.org> wrote:
> >
> > I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM Lite
> > Connected to a Motorola CDM-750. This is a remote link for a local
> > repeater that doesn't have internet access at the site.
> >
> > When I had the rpt file configured for duplex=0 the node functions
> > perfectly without any telemetry. When I set the file for 1 as soon as
> > the repeater transmits the node starts a cycle of transmitting a
> > courtsey tone, dropping the carrier, transmitting a courtsey tone,
> > dropping the carrier, and so on. It continues on and on until I change
> > the option back to 0
> >
> > I am hoping this is a simple setting I am missing.
> >
> > Thank you in advance!
> >
> > Justin
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 16 Sep 2017 21:25:15 -0400
> From: Justin Grigg <jgrigg at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Simplex Mode 1 Issues
> Message-ID: <d1777ea0-9f5f-4d42-b873-5be03b6e2aba at iPhone>
> Content-Type: text/plain; charset="utf-8"
>
>
>
>
> Thanks Justin! I don't really care about the beeps, but I would like the
> connection announcements. Any thoughts on the strange behavior when set to
> 1?
>
>
>
> Thanks, Justin
>
>
>
>
>
>
>
> >
> > On Sep 16, 2017 at 9:22 PM, <Justin Reed via arm-allstar
> (mailto:arm-allstar at hamvoip.org)> wrote:
> >
> >
> >
> > This is exactly how it should work. You want 0 for a repeater remote
> base. You can use 1 for a simplex base station if you want all the beeps.
> Regards, Justin > On Sep 16, 2017, at 7:25 PM, Justin Grigg via
> arm-allstar wrote: > > I have a newly imaged Pi3 connected to a
> Repeater
> Builder USB-RIM Lite > Connected to a Motorola CDM-750. This is a remote
> link for a local repeater > that doesn't have internet access at the
> site.
> > > When I had the rpt file configured for duplex=0 the node functions
> >
> perfectly without any telemetry. When I set the file for 1 as soon as the
> >
> repeater transmits the node starts a cycle of transmitting a courtsey tone,
> > dropping the carrier, transmitting a courtsey tone, dropping the
> carrier,
> > and so on. It continues on and on until I change the option back to 0 >
> > I am hoping this is a simple setting I am missing. > > Thank you in
> advance! > > Justin > ______________________________
> _________________
> > > arm-alls
> tar mailing list > arm-allstar at hamvoip.org >
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar > >
> Visit
> the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________ arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the
> BBB
> and RPi2/3 web page - http://hamvoip.org
> >
> >
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 17 Sep 2017 01:38:11 +0000 (UTC)
> From: Eric Harrison <n7jys at yahoo.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Simplex Mode 1 Issues
> Message-ID: <72062568.953860.1505612291365 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> I have experience the same issue in duplex mode 1 and turning the hangtime
> to ZERO.
> There is still a ping pong effect that occurs because of the repeaters
> squelch hangtime. ?
>
> if you want to run Duplex mode 1 to gain your telemetry your link to the
> repeater will need to be a simplex link or run ctcss on the repeater only
> when a cos signal is present. The S-comm 7330?
> controller I use has this capability.??Eric (N7JYS) Marshall's
> Communications
>
> From: Justin Grigg via arm-allstar <arm-allstar at hamvoip.org>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Justin Grigg <jgrigg at gmail.com>
> Sent: Saturday, September 16, 2017 8:08 PM
> Subject: [arm-allstar] Simplex Mode 1 Issues
>
> I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM Lite
> Connected to a Motorola CDM-750. This is a remote link for a local repeater
> that doesn't have internet access at the site.
>
> When I had the rpt file configured for duplex=0 the node functions
> perfectly
> without any telemetry. When I set the file for 1 as soon as the repeater
> transmits the node starts a cycle of transmitting a courtsey tone, dropping
> the carrier, transmitting a courtsey tone, dropping the carrier, and so on.
> It continues on and on until I change the option back to 0
>
> I am hoping this is a simple setting I am missing.
>
> Thank you in advance!
>
> Justin
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Sat, 16 Sep 2017 22:56:38 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Simplex Mode 1 Issues
> Message-ID:
> <CAMp6vsso-UWF9Cot=CTvEbP7vwivsX8AjN_Z8f3RC98c5J8ycw at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Justin,
>
> The ping-pong effect is caused by the courtesy tone. You have a choice of
> using duplex=0 but then you would have no connection messages. What you
> should do is use duplex=1 and nounkeyct=1 - this command is already in
> rpt.conf but set to 0. This should work in your situation.
>
> Another option in a case where a repeater has no Internet access and thus
> no
> ability to directly run Allstar is to have its output PL follow the input
> PL. Then your remote node would not hear any tail transmission and would
> respond just like the repeater user was coming directly to your node.
> Carrying that a step further the repeater could have two different output
> PL's, one following the input and the other the output. In that scenario
> repeater users would use the output PL and your remote node the input PL.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Sep 16, 2017 at 8:25 PM, "Justin Grigg via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM Lite
> > Connected to a Motorola CDM-750. This is a remote link for a local
> > repeater that doesn't have internet access at the site.
> >
> > When I had the rpt file configured for duplex=0 the node functions
> > perfectly without any telemetry. When I set the file for 1 as soon as
> > the repeater transmits the node starts a cycle of transmitting a
> > courtsey tone, dropping the carrier, transmitting a courtsey tone,
> > dropping the carrier, and so on. It continues on and on until I change
> > the option back to 0
> >
> > I am hoping this is a simple setting I am missing.
> >
> > Thank you in advance!
> >
> > Justin
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
>
>
> ------------------------------
>
> Message: 5
> Date: Sat, 16 Sep 2017 23:30:59 -0400
> From: Justin Grigg <jgrigg at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Simplex Mode 1 Issues
> Message-ID:
> <CAHyULxzJ=YNHz9dXCA=prZLHnHbt5sgBPUzPEM13PkJazUsTYQ at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> That did the trick!! Thank you again!
>
> On Sat, Sep 16, 2017 at 10:56 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Justin,
> >
> > The ping-pong effect is caused by the courtesy tone. You have a
> > choice of using duplex=0 but then you would have no connection
> > messages. What you should do is use duplex=1 and nounkeyct=1 - this
> > command is already in rpt.conf but set to 0. This should work in your
> situation.
> >
> > Another option in a case where a repeater has no Internet access and
> > thus no ability to directly run Allstar is to have its output PL
> > follow the input PL. Then your remote node would not hear any tail
> > transmission and would respond just like the repeater user was coming
> directly to your node.
> > Carrying that a step further the repeater could have two different
> > output PL's, one following the input and the other the output. In that
> > scenario repeater users would use the output PL and your remote node the
> input PL.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Sat, Sep 16, 2017 at 8:25 PM, "Justin Grigg via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM
> > > Lite Connected to a Motorola CDM-750. This is a remote link for a
> > > local
> > repeater
> > > that doesn't have internet access at the site.
> > >
> > > When I had the rpt file configured for duplex=0 the node functions
> > > perfectly without any telemetry. When I set the file for 1 as soon
> > > as the repeater transmits the node starts a cycle of transmitting a
> > > courtsey
> > tone,
> > > dropping the carrier, transmitting a courtsey tone, dropping the
> > > carrier, and so on. It continues on and on until I change the option
> > > back to 0
> > >
> > > I am hoping this is a simple setting I am missing.
> > >
> > > Thank you in advance!
> > >
> > > Justin
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Message: 6
> Date: Sat, 16 Sep 2017 21:21:58 -0700
> From: "ku6v" <ku6v at pacbell.net>
> To: <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] arm-allstar Digest, Vol 40, Issue 17
> message 6
> Message-ID: <002501d32f6c$81e29540$85a7bfc0$@pacbell.net>
> Content-Type: text/plain; charset="us-ascii"
>
> First of all I am so sorry for your loss Dave. I still miss my Dad and he
> passed in 2001. I feel your sadness.
> Doug,
> I am using the menu to setup WIFI.
> The router is an Asus RT-N56U. I have other wireless devices that are
> connected to it. Mainly cameras around the property.
>
> 73
> Don
> KU6V
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> arm-allstar-request at hamvoip.org
> Sent: Saturday, September 16, 2017 6:08 PM
> To: arm-allstar at hamvoip.org
> Subject: arm-allstar Digest, Vol 40, Issue 17
>
> Send arm-allstar mailing list submissions to
> arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
> arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
> arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of arm-allstar digest..."
>
>
> Today's Topics:
>
> 1. Re: KB4FXC's father (Chris Viningre)
> 2. Re: Audio Level Bug? (Josh W4ZZK)
> 3. wifi with new 1.5 install (ku6v)
> 4. No Telemetry on second node (Bobby Bruton)
> 5. Re: Audio Level Bug? (Doug Crompton)
> 6. Re: wifi with new 1.5 install (Doug Crompton)
> 7. Re: No Telemetry on second node (Doug Crompton)
> 8. Re: KB4FXC's father (John Baxter)
> 9. Simplex Mode 1 Issues (Justin Grigg)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 16 Sep 2017 11:18:59 -0600
> From: Chris Viningre <chrisviningre at gmail.com>
> To: arm-allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] KB4FXC's father
> Message-ID:
> <CA+QqUh=b0EvWL4Of7tZg=717qXfnjemz+rgjqecNVjGbJn4Nig at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Dave, Our prayers will be with you and your family.
>
> Chris WS5B
>
> On Sep 16, 2017 8:36 AM, Doug Crompton via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
>
> > I am very sorry to report that Dave, KB4FXC's father passed away this
> > morning. He had been ill for quite sometime. In spite of that and the
> > fact that he is also taking care of his elderly mother he has been
> > able to both run a business and very significantly contribute to the
> > hamvoip Allstar effort. Our deepest sympathy and prayers go out to
> > Dave
> and his family.
> > Please understand that there may be some delay in our latest
> > significant update which is just about ready to be released.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 16 Sep 2017 13:01:54 -0500
> From: Josh W4ZZK <w4zzkjosh at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Audio Level Bug?
> Message-ID:
> <CABKLMaO+FEgsKps=aHWz2aVsTF=uQQ-B33eKf6Xq+SFrudCXdQ at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Yes, latest greatest. RPi 3. USB Fob. Yes, using simpleusb. Tried it
> three times this morning, with three different RPi's and 3 different
> Fobs..... does it again and again.
>
> On Fri, Sep 15, 2017 at 10:03 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Josh,
> >
> > Just to confirm - you are using hamvoip V1.5 code? What hardware are
> > you using? Are you using simpleusb-tune-menu from the main menu? I
> > have no knowledge of this ever happening before. We routinely set
> > levels in the menu while transmitting.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Sep 15, 2017 at 10:16 PM, "Josh W4ZZK via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I have written it to 3 SD Cards. It's like the issue is replicated
> > > when the system would be Transmitting while in the Audio Tune Menu.
> > > That's
> > when
> > > it goes from "working" to "broken". I wish I could describe it better.
> > It
> > > can work and does work, until this circumstance is going on, if that
> > makes
> > > any sense.
> > >
> > > If the system is transmitting while you go into the Audio Tune Menu,
> > > it breaks itself in there.
> > >
> > >
> > > On Fri, Sep 15, 2017 at 8:59 PM, "Doug Crompton via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Josh,
> > > >
> > > > This sounds like a bad SD card or bad write. It obviously should
> > > > not do that. I would write the card again or get a new card and
> > > > write
> that.
> > All
> > > > the software should just work.
> > > >
> > > >
> > > > *73 Doug*
> > > >
> > > > *WA3DSP*
> > > >
> > > > *http://www.crompton.com/hamradio
> > > > <http://www.crompton.com/hamradio>*
> > > >
> > > >
> > > > On Fri, Sep 15, 2017 at 8:15 PM, "Josh Hatton via arm-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > Hello
> > > > > Since I updated last with a fresh image to the SD, I've not had
> > > > > any
> > TX
> > > > > Audio of any kind. Long story short, I've had to run
> > > > > "alsamixer" and
> > > > turn
> > > > > levels up to get any sound on TX. The tune menu built into the
> > package
> > > > > doesn't make any level changes for me. For what it's worth, I
> > > > > was
> > > > swapping
> > > > > the COS from usb to usbinvert while the TX was keyed up from the
> > wrong
> > > > > setting. I dont know if that would relate to anyone's possible
> > issues,
> > > > but
> > > > > I have that problem. Every time I reboot the Pi, I have to go
> > > > > into Alsamixer again and turn levels up.
> > > > >
> > > > > Doug, I can answer questions for you if needed.
> > > > >
> > > > > Josh W4ZZK
> > > > > _______________________________________________
> > > > >
> > > > > arm-allstar mailing list
> > > > > arm-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > >
> > > > >
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 16 Sep 2017 11:49:34 -0700
> From: "ku6v" <ku6v at pacbell.net>
> To: <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] wifi with new 1.5 install
> Message-ID: <001201d32f1c$8d7485d0$a85d9170$@pacbell.net>
> Content-Type: text/plain; charset="us-ascii"
>
> Howdy all,
>
> I just installed V1.5 on a Pi3. The wifi when requested during setup sees
> the ssid of my router. I entered the correct password but I cannot make the
> connection. Any help?
>
>
>
> 73
>
> Don
>
> KU6V
>
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Sat, 16 Sep 2017 19:10:25 +0000 (UTC)
> From: Bobby Bruton <bobbybruton at yahoo.com>
> To: "arm-allstar at hamvoip.org" <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] No Telemetry on second node
> Message-ID: <690478697.834247.1505589025820 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> Im sure im not the first to ask this.
> Im running a PI3 with 2 USB URI's
> I have telemetry on Node 1But nothing on Node 2 Rpt.conf ?=
> ?rxchannel=SimpleUSB/usb ?for Node1? ? ? ? ? ? ? ? ?
> ?rxchannel=SimpleUSB/usb1 for Node2 Both Nodes work,?Problem?No Telemetry
> on
> second node?
>
> ------------------------------
>
> Message: 5
> Date: Sat, 16 Sep 2017 17:30:40 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Audio Level Bug?
> Message-ID:
> <CAMp6vss4i+v33BXyn-q8=5=EKD9DYvQE0U3H0s4GC_Z6MmAGbw at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Josh,
>
> You have never said exactly what it does. If things are not set right in
> simpleusb it can do strange things.
>
> What is your radio and what settings are you setting/changing in simpleusb?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Sat, Sep 16, 2017 at 2:01 PM, "Josh W4ZZK via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Yes, latest greatest. RPi 3. USB Fob. Yes, using simpleusb. Tried
> > it three times this morning, with three different RPi's and 3
> > different Fobs..... does it again and again.
> >
> > On Fri, Sep 15, 2017 at 10:03 PM, "Doug Crompton via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Josh,
> > >
> > > Just to confirm - you are using hamvoip V1.5 code? What hardware
> > > are you using? Are you using simpleusb-tune-menu from the main menu?
> > > I have no knowledge of this ever happening before. We routinely set
> > > levels in the menu while transmitting.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio
> > > <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Fri, Sep 15, 2017 at 10:16 PM, "Josh W4ZZK via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > I have written it to 3 SD Cards. It's like the issue is
> > > > replicated
> > when
> > > > the system would be Transmitting while in the Audio Tune Menu.
> > > > That's
> > > when
> > > > it goes from "working" to "broken". I wish I could describe it
> better.
> > > It
> > > > can work and does work, until this circumstance is going on, if
> > > > that
> > > makes
> > > > any sense.
> > > >
> > > > If the system is transmitting while you go into the Audio Tune
> > > > Menu, it breaks itself in there.
> > > >
> > > >
> > > > On Fri, Sep 15, 2017 at 8:59 PM, "Doug Crompton via arm-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > Josh,
> > > > >
> > > > > This sounds like a bad SD card or bad write. It obviously should
> > > > > not
> > do
> > > > > that. I would write the card again or get a new card and write
> that.
> > > All
> > > > > the software should just work.
> > > > >
> > > > >
> > > > > *73 Doug*
> > > > >
> > > > > *WA3DSP*
> > > > >
> > > > > *http://www.crompton.com/hamradio
> > > > > <http://www.crompton.com/hamradio
> > >*
> > > > >
> > > > >
> > > > > On Fri, Sep 15, 2017 at 8:15 PM, "Josh Hatton via arm-allstar" <
> > > > > arm-allstar at hamvoip.org> wrote:
> > > > >
> > > > > > Hello
> > > > > > Since I updated last with a fresh image to the SD, I've not
> > > > > > had any
> > > TX
> > > > > > Audio of any kind. Long story short, I've had to run "alsamixer"
> > and
> > > > > turn
> > > > > > levels up to get any sound on TX. The tune menu built into the
> > > package
> > > > > > doesn't make any level changes for me. For what it's worth, I
> > > > > > was
> > > > > swapping
> > > > > > the COS from usb to usbinvert while the TX was keyed up from
> > > > > > the
> > > wrong
> > > > > > setting. I dont know if that would relate to anyone's
> > > > > > possible
> > > issues,
> > > > > but
> > > > > > I have that problem. Every time I reboot the Pi, I have to go
> > > > > > into Alsamixer again and turn levels up.
> > > > > >
> > > > > > Doug, I can answer questions for you if needed.
> > > > > >
> > > > > > Josh W4ZZK
> > > > > > _______________________________________________
> > > > > >
> > > > > > arm-allstar mailing list
> > > > > > arm-allstar at hamvoip.org
> > > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >
> > > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > > >
> > > > > >
> > > > > _______________________________________________
> > > > >
> > > > > arm-allstar mailing list
> > > > > arm-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > >
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
>
>
> ------------------------------
>
> Message: 6
> Date: Sat, 16 Sep 2017 17:34:04 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] wifi with new 1.5 install
> Message-ID:
> <CAMp6vsv7YGBK2sbar9k4eUAs8yWYtmw7MSz7KifJ6_L7=8CDCA at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> OK, just to confirm you are using the menu wifi setup? What is your router
> model? Service provider? WIFI does work but I have seen cases where a
> particular router may have problems. Are you getting an IP address back
> when
> you boot using WIFI? If it is 127.0.0.1 then you are not connecting.
> Anything else you probably are and there might be other issues.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Sep 16, 2017 at 2:49 PM, "ku6v via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Howdy all,
> >
> > I just installed V1.5 on a Pi3. The wifi when requested during setup
> > sees the ssid of my router. I entered the correct password but I
> > cannot make the connection. Any help?
> >
> >
> >
> > 73
> >
> > Don
> >
> > KU6V
> >
> >
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
>
>
> ------------------------------
>
> Message: 7
> Date: Sat, 16 Sep 2017 17:36:20 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] No Telemetry on second node
> Message-ID:
> <CAMp6vsvBMv9RtRn65Xzggyz4CO-m3+TT5mX+gqtosWOoAxazXw at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Telemetry is control by the duplex type. Duplex 0 is no telemetry and
> duplex
> 1 has telemetry for simplex operation. Have you changed any other settings
> in rpt.conf?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Sep 16, 2017 at 3:10 PM, "Bobby Bruton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Im sure im not the first to ask this.
> > Im running a PI3 with 2 USB URI's
> > I have telemetry on Node 1But nothing on Node 2 Rpt.conf =
> > rxchannel=SimpleUSB/usb for Node1
> > rxchannel=SimpleUSB/usb1 for Node2
> > Both Nodes work, Problem No Telemetry on second node
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> ------------------------------
>
> Message: 8
> Date: Sat, 16 Sep 2017 20:07:15 -0400
> From: John Baxter <jwilliambaxter at me.com>
> To: John Baxter via arm-allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <doug at crompton.com>
> Subject: Re: [arm-allstar] KB4FXC's father
> Message-ID: <2D537502-F8F9-48A3-9F29-8D96AAE78438 at me.com>
> Content-Type: text/plain; charset=utf-8
>
> Dear Dave KB4FXC,
>
> Deepest sympathy on your Dad?s passing. Times heals but we never forget -
> my Dad?s keen interest in SWL taught me to love radio.
>
> Also thank you and your team so much for all your dedicated work on Allstar
> - you are enriching the lives of so many?
>
> Best 73,
> -john n3fpz
>
> John William Baxter jwilliambaxter at me.com <mailto:
> jwilliambaxter at me.com>
> Web Development/Multimedia: LFM Studio
> <http://lfmstudio.com/>
> Producer for: Lydia Ferrell LydiaFerrell.com
> <http://lydiaferrell.com/>
> 215-460-9128 iPhone/text/FaceTime
> 215-572-0471 landline
> lydiasaudioguy Skype
> N3FPZ amateur radio / Allstar node: 45506
>
> Psalms 19:1 ?the heavens declare the glory of God?
>
>
>
> ------------------------------
>
> Message: 9
> Date: Sat, 16 Sep 2017 20:25:24 -0400
> From: Justin Grigg <jgrigg at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] Simplex Mode 1 Issues
> Message-ID:
> <CAHyULxx04vZVSjtzq6tsGX4Tj0ue3v0ta8Covv23xUeoxr+T4A at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM Lite
> Connected to a Motorola CDM-750. This is a remote link for a local repeater
> that doesn't have internet access at the site.
>
> When I had the rpt file configured for duplex=0 the node functions
> perfectly
> without any telemetry. When I set the file for 1 as soon as the repeater
> transmits the node starts a cycle of transmitting a courtsey tone, dropping
> the carrier, transmitting a courtsey tone, dropping the carrier, and so on.
> It continues on and on until I change the option back to 0
>
> I am hoping this is a simple setting I am missing.
>
> Thank you in advance!
>
> Justin
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of arm-allstar Digest, Vol 40, Issue 17
> *******************************************
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of arm-allstar Digest, Vol 40, Issue 18
> *******************************************
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
More information about the arm-allstar
mailing list