[arm-allstar] arm-allstar Digest, Vol 40, Issue 17 message 6

ku6v ku6v at pacbell.net
Sat Sep 16 23:21:58 EST 2017 

First of all I am so sorry for your loss Dave. I still miss my Dad and he
passed in 2001. I feel your sadness.
Doug,
I am using the menu to setup WIFI.
The router is an Asus RT-N56U. I have other wireless devices that are
connected to it. Mainly cameras around the property.

73
Don
KU6V

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
arm-allstar-request at hamvoip.org
Sent: Saturday, September 16, 2017 6:08 PM
To: arm-allstar at hamvoip.org
Subject: arm-allstar Digest, Vol 40, Issue 17

Send arm-allstar mailing list submissions to
	arm-allstar at hamvoip.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
	arm-allstar-request at hamvoip.org

You can reach the person managing the list at
	arm-allstar-owner at hamvoip.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of arm-allstar digest..."


Today's Topics:

   1. Re: KB4FXC's father (Chris Viningre)
   2. Re: Audio Level Bug? (Josh W4ZZK)
   3. wifi with new 1.5 install (ku6v)
   4. No Telemetry on second node (Bobby Bruton)
   5. Re: Audio Level Bug? (Doug Crompton)
   6. Re: wifi with new 1.5 install (Doug Crompton)
   7. Re: No Telemetry on second node (Doug Crompton)
   8. Re: KB4FXC's father (John Baxter)
   9. Simplex Mode 1 Issues (Justin Grigg)


----------------------------------------------------------------------

Message: 1
Date: Sat, 16 Sep 2017 11:18:59 -0600
From: Chris Viningre <chrisviningre at gmail.com>
To: arm-allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] KB4FXC's father
Message-ID:
	<CA+QqUh=b0EvWL4Of7tZg=717qXfnjemz+rgjqecNVjGbJn4Nig at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Dave, Our prayers will be with you and your family.

Chris WS5B

On Sep 16, 2017 8:36 AM, Doug Crompton via arm-allstar <
arm-allstar at hamvoip.org> wrote:

> I am very sorry to report that Dave, KB4FXC's father passed away this 
> morning. He had been ill for quite sometime. In spite of that and the 
> fact that he is also taking care of his elderly mother he has been 
> able to both run a business and very significantly contribute to the 
> hamvoip Allstar effort. Our deepest sympathy and prayers go out to Dave
and his family.
> Please understand that there may be some delay in our latest 
> significant update which is just about ready to be released.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>


------------------------------

Message: 2
Date: Sat, 16 Sep 2017 13:01:54 -0500
From: Josh W4ZZK <w4zzkjosh at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Audio Level Bug?
Message-ID:
	<CABKLMaO+FEgsKps=aHWz2aVsTF=uQQ-B33eKf6Xq+SFrudCXdQ at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Yes, latest greatest. RPi 3.  USB Fob.  Yes, using simpleusb.  Tried it
three times this morning, with three different RPi's and 3 different
Fobs..... does it again and again.

On Fri, Sep 15, 2017 at 10:03 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Josh,
>
>  Just to confirm - you are using hamvoip V1.5 code? What hardware are 
> you using? Are you using simpleusb-tune-menu from the main menu? I 
> have no knowledge of this ever happening before. We routinely set 
> levels in the menu while transmitting.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Fri, Sep 15, 2017 at 10:16 PM, "Josh W4ZZK via arm-allstar" < 
> arm-allstar at hamvoip.org> wrote:
>
> > I have written it to 3 SD Cards.  It's like the issue is replicated 
> > when the system would be Transmitting while in the Audio Tune Menu.  
> > That's
> when
> > it goes from "working" to "broken".  I wish I could describe it better.
> It
> > can work and does work, until this circumstance is going on, if that
> makes
> > any sense.
> >
> > If the system is transmitting while you go into the Audio Tune Menu, 
> > it breaks itself in there.
> >
> >
> > On Fri, Sep 15, 2017 at 8:59 PM, "Doug Crompton via arm-allstar" < 
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Josh,
> > >
> > > This sounds like a bad SD card or bad write. It obviously should 
> > > not do that. I would write the card again or get a new card and write
that.
> All
> > > the software should just work.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio 
> > > <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Fri, Sep 15, 2017 at 8:15 PM, "Josh Hatton via arm-allstar" < 
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Hello
> > > > Since I updated last with a fresh image to the SD, I've not had 
> > > > any
> TX
> > > > Audio of any kind.  Long story short, I've had to run 
> > > > "alsamixer" and
> > > turn
> > > > levels up to get any sound on TX. The tune menu built into the
> package
> > > > doesn't make any level changes for me.  For what it's worth, I 
> > > > was
> > > swapping
> > > > the COS from usb to usbinvert while the TX was keyed up from the
> wrong
> > > > setting.  I dont know if that would relate to anyone's possible
> issues,
> > > but
> > > > I have that problem.  Every time I reboot the Pi, I have to go 
> > > > into Alsamixer again and turn levels up.
> > > >
> > > > Doug, I can answer questions for you if needed.
> > > >
> > > > Josh W4ZZK
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>


------------------------------

Message: 3
Date: Sat, 16 Sep 2017 11:49:34 -0700
From: "ku6v" <ku6v at pacbell.net>
To: <arm-allstar at hamvoip.org>
Subject: [arm-allstar] wifi with new 1.5 install
Message-ID: <001201d32f1c$8d7485d0$a85d9170$@pacbell.net>
Content-Type: text/plain;	charset="us-ascii"

Howdy all,

I just installed V1.5 on a Pi3. The wifi when requested during setup sees
the ssid of my router. I entered the correct password but I cannot make the
connection. Any help?

 

73

Don

KU6V

 



------------------------------

Message: 4
Date: Sat, 16 Sep 2017 19:10:25 +0000 (UTC)
From: Bobby Bruton <bobbybruton at yahoo.com>
To: "arm-allstar at hamvoip.org" <arm-allstar at hamvoip.org>
Subject: [arm-allstar] No Telemetry on second node
Message-ID: <690478697.834247.1505589025820 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

Im sure im not the first to ask this.
Im running a PI3 with 2 USB URI's
I have telemetry on Node 1But nothing on Node 2 Rpt.conf ?=
?rxchannel=SimpleUSB/usb ?for Node1? ? ? ? ? ? ? ? ?
?rxchannel=SimpleUSB/usb1 for Node2 Both Nodes work,?Problem?No Telemetry on
second node?

------------------------------

Message: 5
Date: Sat, 16 Sep 2017 17:30:40 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Audio Level Bug?
Message-ID:
	<CAMp6vss4i+v33BXyn-q8=5=EKD9DYvQE0U3H0s4GC_Z6MmAGbw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Josh,

 You have never said exactly what it does. If things are not set right in
simpleusb it can do strange things.

What is your radio and what settings are you setting/changing in simpleusb?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*



On Sat, Sep 16, 2017 at 2:01 PM, "Josh W4ZZK via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Yes, latest greatest. RPi 3.  USB Fob.  Yes, using simpleusb.  Tried 
> it three times this morning, with three different RPi's and 3 
> different Fobs..... does it again and again.
>
> On Fri, Sep 15, 2017 at 10:03 PM, "Doug Crompton via arm-allstar" < 
> arm-allstar at hamvoip.org> wrote:
>
> > Josh,
> >
> >  Just to confirm - you are using hamvoip V1.5 code? What hardware 
> > are you using? Are you using simpleusb-tune-menu from the main menu? 
> > I have no knowledge of this ever happening before. We routinely set 
> > levels in the menu while transmitting.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio 
> > <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Sep 15, 2017 at 10:16 PM, "Josh W4ZZK via arm-allstar" < 
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I have written it to 3 SD Cards.  It's like the issue is 
> > > replicated
> when
> > > the system would be Transmitting while in the Audio Tune Menu.  
> > > That's
> > when
> > > it goes from "working" to "broken".  I wish I could describe it
better.
> > It
> > > can work and does work, until this circumstance is going on, if 
> > > that
> > makes
> > > any sense.
> > >
> > > If the system is transmitting while you go into the Audio Tune 
> > > Menu, it breaks itself in there.
> > >
> > >
> > > On Fri, Sep 15, 2017 at 8:59 PM, "Doug Crompton via arm-allstar" < 
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Josh,
> > > >
> > > > This sounds like a bad SD card or bad write. It obviously should 
> > > > not
> do
> > > > that. I would write the card again or get a new card and write that.
> > All
> > > > the software should just work.
> > > >
> > > >
> > > > *73 Doug*
> > > >
> > > > *WA3DSP*
> > > >
> > > > *http://www.crompton.com/hamradio 
> > > > <http://www.crompton.com/hamradio
> >*
> > > >
> > > >
> > > > On Fri, Sep 15, 2017 at 8:15 PM, "Josh Hatton via arm-allstar" < 
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > Hello
> > > > > Since I updated last with a fresh image to the SD, I've not 
> > > > > had any
> > TX
> > > > > Audio of any kind.  Long story short, I've had to run "alsamixer"
> and
> > > > turn
> > > > > levels up to get any sound on TX. The tune menu built into the
> > package
> > > > > doesn't make any level changes for me.  For what it's worth, I 
> > > > > was
> > > > swapping
> > > > > the COS from usb to usbinvert while the TX was keyed up from 
> > > > > the
> > wrong
> > > > > setting.  I dont know if that would relate to anyone's 
> > > > > possible
> > issues,
> > > > but
> > > > > I have that problem.  Every time I reboot the Pi, I have to go 
> > > > > into Alsamixer again and turn levels up.
> > > > >
> > > > > Doug, I can answer questions for you if needed.
> > > > >
> > > > > Josh W4ZZK
> > > > > _______________________________________________
> > > > >
> > > > > arm-allstar mailing list
> > > > > arm-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > > >
> > > > >
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>


------------------------------

Message: 6
Date: Sat, 16 Sep 2017 17:34:04 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] wifi with new 1.5 install
Message-ID:
	<CAMp6vsv7YGBK2sbar9k4eUAs8yWYtmw7MSz7KifJ6_L7=8CDCA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

OK, just to confirm you are using the menu wifi setup? What is your router
model? Service provider? WIFI does work but I have seen cases where a
particular router may have problems. Are you getting an IP address back when
you boot using WIFI? If it is 127.0.0.1 then you are not connecting.
Anything else you probably are and there might be other issues.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Sep 16, 2017 at 2:49 PM, "ku6v via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Howdy all,
>
> I just installed V1.5 on a Pi3. The wifi when requested during setup 
> sees the ssid of my router. I entered the correct password but I 
> cannot make the connection. Any help?
>
>
>
> 73
>
> Don
>
> KU6V
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>


------------------------------

Message: 7
Date: Sat, 16 Sep 2017 17:36:20 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] No Telemetry on second node
Message-ID:
	<CAMp6vsvBMv9RtRn65Xzggyz4CO-m3+TT5mX+gqtosWOoAxazXw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Telemetry is control by the duplex type. Duplex 0 is no telemetry and duplex
1 has telemetry for simplex operation. Have you changed any other settings
in rpt.conf?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Sep 16, 2017 at 3:10 PM, "Bobby Bruton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Im sure im not the first to ask this.
> Im running a PI3 with 2 USB URI's
> I have telemetry on Node 1But nothing on Node 2 Rpt.conf  =  
> rxchannel=SimpleUSB/usb  for Node1
>  rxchannel=SimpleUSB/usb1 for Node2
> Both Nodes work, Problem No Telemetry on second node 
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org


------------------------------

Message: 8
Date: Sat, 16 Sep 2017 20:07:15 -0400
From: John Baxter <jwilliambaxter at me.com>
To: John Baxter via arm-allstar <arm-allstar at hamvoip.org>
Cc: Doug Crompton <doug at crompton.com>
Subject: Re: [arm-allstar] KB4FXC's father
Message-ID: <2D537502-F8F9-48A3-9F29-8D96AAE78438 at me.com>
Content-Type: text/plain;	charset=utf-8

Dear Dave KB4FXC,

Deepest sympathy on your Dad?s passing.  Times heals but we never forget -
my Dad?s keen interest in SWL taught me to love radio.

Also thank you and your team so much for all your dedicated work on Allstar
- you are enriching the lives of so many?

Best 73,
-john n3fpz

John William Baxter	jwilliambaxter at me.com <mailto:jwilliambaxter at me.com>
Web Development/Multimedia: 			LFM Studio
<http://lfmstudio.com/>
Producer for: 		Lydia Ferrell     LydiaFerrell.com
<http://lydiaferrell.com/>
215-460-9128		iPhone/text/FaceTime
215-572-0471		landline
lydiasaudioguy		Skype
N3FPZ				amateur radio / Allstar node: 45506

  Psalms 19:1 ?the heavens declare the glory of God?	



------------------------------

Message: 9
Date: Sat, 16 Sep 2017 20:25:24 -0400
From: Justin Grigg <jgrigg at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: [arm-allstar] Simplex Mode 1 Issues
Message-ID:
	<CAHyULxx04vZVSjtzq6tsGX4Tj0ue3v0ta8Covv23xUeoxr+T4A at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM Lite
Connected to a Motorola CDM-750. This is a remote link for a local repeater
that doesn't have internet access at the site.

When I had the rpt file configured for duplex=0 the node functions perfectly
without any telemetry. When I set the file for 1 as soon as the repeater
transmits the node starts a cycle of transmitting a courtsey tone, dropping
the carrier, transmitting a courtsey tone, dropping the carrier, and so on.
It continues on and on until I change the option back to 0

I am hoping this is a simple setting I am missing.

Thank you in advance!

Justin


------------------------------

Subject: Digest Footer

_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar


------------------------------

End of arm-allstar Digest, Vol 40, Issue 17
*******************************************

More information about the arm-allstar mailing list