[arm-allstar] Audio Level Bug?

[Josh W4ZZK]

Yes, latest greatest. RPi 3.  USB Fob.  Yes, using simpleusb.  Tried it
three times this morning, with three different RPi's and 3 different
Fobs..... does it again and again.

On Fri, Sep 15, 2017 at 10:03 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Josh,
>
>  Just to confirm - you are using hamvoip V1.5 code? What hardware are you
> using? Are you using simpleusb-tune-menu from the main menu? I have no
> knowledge of this ever happening before. We routinely set levels in the
> menu while transmitting.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Fri, Sep 15, 2017 at 10:16 PM, "Josh W4ZZK via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have written it to 3 SD Cards.  It's like the issue is replicated when
> > the system would be Transmitting while in the Audio Tune Menu.  That's
> when
> > it goes from "working" to "broken".  I wish I could describe it better.
> It
> > can work and does work, until this circumstance is going on, if that
> makes
> > any sense.
> >
> > If the system is transmitting while you go into the Audio Tune Menu, it
> > breaks itself in there.
> >
> >
> > On Fri, Sep 15, 2017 at 8:59 PM, "Doug Crompton via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Josh,
> > >
> > > This sounds like a bad SD card or bad write. It obviously should not do
> > > that. I would write the card again or get a new card and write that.
> All
> > > the software should just work.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Fri, Sep 15, 2017 at 8:15 PM, "Josh Hatton via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Hello
> > > > Since I updated last with a fresh image to the SD, I've not had any
> TX
> > > > Audio of any kind.  Long story short, I've had to run "alsamixer" and
> > > turn
> > > > levels up to get any sound on TX. The tune menu built into the
> package
> > > > doesn't make any level changes for me.  For what it's worth, I was
> > > swapping
> > > > the COS from usb to usbinvert while the TX was keyed up from the
> wrong
> > > > setting.  I dont know if that would relate to anyone's possible
> issues,
> > > but
> > > > I have that problem.  Every time I reboot the Pi, I have to go into
> > > > Alsamixer again and turn levels up.
> > > >
> > > > Doug, I can answer questions for you if needed.
> > > >
> > > > Josh W4ZZK
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>