[arm-allstar] Weather on hourly ID

[wadeoestreich]

Yeah I have tried all the options, zip code (68310) Airport code (KBIE) 
just tried the (PHL) and all i get is this line.


/bash: weather.sh: command not found/


The script is working on one node now just not the newest install. I 
swear I did the same to both now that I got the SSH thing working. 
Thanks BTW that did work!


Does that weather script come in the Ver. 1.5 or is it part of the 
wx_conditions or AutoSky downloads?


Wade



On 09/15/2017 04:20 PM, "Doug Crompton via arm-allstar" wrote:
> There is no document. It is a simple script. Did you try other zips? maybe
> yours is not working. Also airport designator. Try phl
>
> [root at Mobile-41139 ~]# weather.sh phl
> 84F 29C / Partly Sunny
>
> [root at Mobile-41139 ~]# weather.sh
>
> USAGE: weather.sh <local zip, airport code, or w-<wunderground station code>
>
> Example: weather.sh 19001, weather.sh phl, weather.sh -wWPAGLENB5
>           Substitute your local codes
>
> Edit script to turn on/off condition reporting and C or F temperature
>
>
>
> On Fri, Sep 15, 2017 at 5:09 PM, "wadeoestreich via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Ok added the zip code to the cron entry. The weather.sh 68310 is not
>> coming back with anything. Where on the site is the document for that
>> script?
>>
>>
>> On 09/15/2017 01:47 PM, "Doug Crompton via arm-allstar" wrote:
>>
>>> Wade,
>>>
>>> Your cron line should look like this -
>>>
>>> 00 0-23 * * * (source /usr/local/etc/allstar.env ; /usr/bin/nice -19
>>> /usr/bin/perl /usr/local/sbin/saytime.pl 18954 $NODE1 > /dev/null)
>>>
>>> This depends on the weather script - make sure it is working - use your
>>> zip
>>>
>>> [root at Mobile-41139 ~]# weather.sh 18954
>>> 80F 26C / Partly Sunny
>>>
>>>
>>> *73 Doug*
>>>
>>> *WA3DSP*
>>>
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>>
>>>
>>> On Fri, Sep 15, 2017 at 2:24 PM, "wadeoestreich via arm-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>>
>>> I have recently setup a new node and reworked and old one (new install)
>>>> and I want to have the current weather conditions on the hourly ID. (just
>>>> temp and sky conditions, no wind speed barometer or anything like that.)
>>>> I
>>>> had this on the previous two setups but for some reason I can not
>>>> remember
>>>> how to get that to work on the new installs.
>>>>
>>>> I have my zip code in the saytime line in rpt.conf like I did in the old
>>>> setups and I have also installed the wx_conditions and AutoSky scripts.
>>>> What am I forgetting?
>>>>
>>>>
>>>> Wade
>>>>
>>>> KC0MLT
>>>>
>>>> _______________________________________________
>>>>
>>>> arm-allstar mailing list
>>>> arm-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>
>>>>
>>>> _______________________________________________
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org