[arm-allstar] Modifying Outbound Telemetry

[Doug Crompton]

As Tim said this info is not passed. If BOTH ends ran the script to map
nodes to calls the call would replace the node at both ends. This only
works for your node not others so it is a user option.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, Sep 15, 2017 at 11:37 AM, "Tim Sawyer via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> The out-of-band telemetry cannot be changed. It's not voice. It's a digital
> status message within IAX packets.
>
> On Wed, Sep 13, 2017 at 9:54 AM, "Stephen Cook via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Good afternoon,
> >
> > I have noticed several nodes in my area that announce connection and
> > disconnection using the repeaters callsign rather than the Allstarlink
> node
> > number. Using the document http://docs.allstarlink.org/drupal/node/131 I
> > was able to get my node to announce connection and disconnection using my
> > repeaters callsign on the local node. However the remote node still
> > announces using my node number.
> >
> > I was wondering if it is possible to change the outbound out-of-band
> > telemetry to the callsign of the Allstarlink node rather than the node
> > number?
> >
> > 73,
> >
> > Stephen
> > va3kxp
> > va3kxp at yahoo.com
> >
> > Sent from my iPad Air
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
>
> --
> --
> Tim
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>