[arm-allstar] Allstar/IRLP/echolink

[David McGough]

Hi Jay,

This method will work....But, be aware that by default this will use the 
same ssh public and private keys on all the nodes, which strictly speaking 
is a security hazard.

To eliminate this concern, after cloning each new installation, just
delete all the key files (ssh_host*) from the /etc/ssh folder and reboot
(or restart the sshd). When the openssh server starts, if no key files
exist, it generates new keys.

73, David KB4FXC



On Thu, 26 Oct 2017, "Jay Urish via arm-allstar" wrote:

> Exactly.
> 
> I guess I could just upgrade a non configured node and save that image 
> for my base installs.
> 
> 
> jay w5gm
> 
> 
> On 10/26/2017 11:34 AM, "Doug Crompton via arm-allstar" wrote:
> > Jay,
> >
> >    The best thing to do is setup the nodes on a wired Ethernet and then move
> > them to the location you are using. Then you will have the latest updates.
> > Are you using Allstar with private nodes? As a repeater controller?
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> >
> > On Thu, Oct 26, 2017 at 11:29 AM, "Jay Urish via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> I was wondering if there was a newer image. The nodes I am working on will
> >> not have internet access.
> >>
> >>
> >>
> >> On 10/26/2017 10:16 AM, David McGough wrote:
> >>
> >>> Hi Jay,
> >>>
> >>> The hamvoip project uses a true "rolling release" (see:
> >>> https://en.wikipedia.org/wiki/Rolling_release ) update strategy.
> >>>
> >>> So, to get the latest code, just run option #1 from the admin menu and
> >>> wait for the updates to complete. It's probably a good idea to reboot your
> >>> RPi after the updates are completed (admin menu option #15).
> >>>
> >>> The most current release is:
> >>> RPi2-3 Version 1.5rc4-6 Allstar - October 17, 2017
> >>>
> >>> You can see the automatically updated release notes at this URL:
> >>> https://hamvoip.org/local/allstar_version.php
> >>>
> >>> 73, David KB4FXC
> >>>
> >>>
> >>> On Thu, 26 Oct 2017, "Jay Urish via arm-allstar" wrote:
> >>>
> >>> Doug, is there a newer release than the candidate version rc2?
> >>>>
> >>>>
> >>>> If you have been away for awhile then you missed a lot! The V1.5 image
> >>>>>> available on the hamvoip.org web page is in place update-able from a
> >>>>>> menu.
> >>>>>> Installation is a breeze. As far as what has been done in the last nine
> >>>>>> months code wise I would suggest you read through the revisions list
> >>>>>> on the
> >>>>>> hamvoip.org web page in the download section. Many additions and
> >>>>>> fixes to
> >>>>>> the code have been made and many more will be in the future. It is a
> >>>>>> very
> >>>>>> active project. Echolink is certainly included and IRLP is about to be.
> >>>>>>
> >>>>>>
> >>>>>> *73 Doug*
> >>>>>>
> >>>>>> *WA3DSP*
> >>>>>>
> >>>>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>> arm-allstar mailing list
> >>>> arm-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>>>
> >>>>
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>