[arm-allstar] I need some pointer connecting two nodes via AREDN

[Doug Crompton]

Jay,

 Well first of all I don't think 0xxx is a valid node. For a private node
try a 4 digit number starting with a 1, like 1200 or 1450, etc. When using
a private node it is the users responsibility to setup routing in Allstar.
This is done in the node stanza of rpt.conf. Each node has to have routing
information to get to the other corresponding nodes. This includes both IP
address and iax port. The iax port is defined in iax.conf and defaults to
4569. See this howto for information on routing -

https://www.hamvoip.org/multi-server%20howto.pdf


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Oct 24, 2017 at 11:27 PM, "Jay Urish via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I need some pointers-
>
> I have a lab setup with 2 AREDN radios and 2 repeaters with Pi3's
>
> node 0300 10.164.63.215
>
> node 0350 10.228.238.198
>
>
> I have layer 3 connectivity. and can ssh to both nodes through AREDN.
>
> When I try to get 0350 to connect to 0300, I get a message "rpt_exec: Node
> 0350 Invalid for connection here!!
>
> I have the nodes defined in the rpt.conf on each node.
>
>
> Where should I start looking?
>
> I am running cromptons image.
>
>
> jay w5gm
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>