[arm-allstar] Port forwarding in an AT&T modem router

[Doug Crompton]

David,

 You might send the modem model number so we can check the manual. If you
are using DHCP on Allstar you will need to made it a reserved or static
DHCP in the router. Then port forward to the assigned IP address.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Oct 24, 2017 at 9:59 PM, "David via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> *       I am using AT&T Uverse through a phone line into my house.  No
> hotspot.
>
>
>
> From: Chris Viningre [mailto:chrisviningre at gmail.com]
> Sent: Tuesday, October 24, 2017 8:19 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: David Overton <davo172 at att.net>
> Subject: Re: [arm-allstar] Port forwarding in an AT&T modem router
>
>
>
> If your using hotspot it wont work. DSL should work.
>
>
>
>
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> chrisviningre at gmail.com <mailto:chrisviningre at gmail.com>
>
>
>
> On Tue, Oct 24, 2017 at 2:01 PM, "David Overton via arm-allstar" <
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org> > wrote:
>
>
>
>
>
> Hi All,
>
> I can get to the port forwarding section of my AT&T modem router; however,
> even though I can see the Raspberry Pi Allstar node, I can not get the
> system to set the port forwarding to the device.  Anyone with AT&T
> experience that can help would be appreciated.
>
> David KF5WDJ
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>