[arm-allstar] Channel staring

[Lloyd Duck]

Scott,

Yes, I'm wanting channel steering just for 3 channels to RF link our two repeater into Allstar and then for a simplex frequency for special events. 

Thank you, 

Lloyd Duck, W5LND

-----Original Message-----
From: Scott Zimmerman [mailto:n3xcc at zewireless.com] 
Sent: Sunday, October 22, 2017 3:56 PM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Lloyd Duck <lduck at me.com>
Subject: Re: [arm-allstar] Channel staring

Lloyd,

you didn't mention that you wanted to do channel steering. That is done via user function I/O. Attached are some examples.

Scott

Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531

On 10/21/2017 11:15 PM, "Lloyd Duck via arm-allstar" wrote:
> I’d like to setup channel starting using two CDM 1250s one each VHF/UHF and use DTMF codes. To connect the radios I’m using a USB-RIM lite.
> 
> Is there a document to start me on the path?
> Scott did help me with some notes from the schematic about the pins.
> http://www.repeater-builder.com/products/pdfs/RB_RIM_Max.pdf
> 
> 
> Lloyd Duck, W5LND
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>