[arm-allstar] AllStar Echolink Audio

[Doug Crompton]

Sorry I just reread your message and I missed the fact that this was
Echolink audio. Assuming your primary levels are set correctly as stated in
my last message you should not have to change the echolink levels by that
much. Something is wrong if you do. The default values have worked for me
for years. Do NOT change simpleusb audio levels to change echolink levels.
You first have to setup your primary Allstar levels in the
simpleusb-tune-menu. Then if you want to fudge the echolink levels you can
do this in rpt.conf but you should not have to change these by much. If you
find you do then the problem is at the other end - someones echolink level
TO you and not your issue.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Thu, Nov 16, 2017 at 9:19 PM, "David via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Wondering if I am missing something. I tried adjusting the audio in USB
> simple tune and in rpt.config. I can not seem to get the transmit audio to
> decrease. I need to decrease it by at least -18db. Turn it down in the app
> by -12db and is still way too high.
> Thanks David KG5RDF
>
>
> Sent from my T-Mobile 4G LTE Device
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>