[arm-allstar] Adding a seconf node/devstr not populating automatically

[Doug Crompton]

Stephen,

    For the device to work you actually have to call it from the second
node in rpt.conf. There is also a procedure to bring up a second node. It
is in the setup howto on the hamvoip.org web page towards the end.

In your second node assignment in rpt.conf  -

rxchannel=SimpleUSB/usb1

This is all in the setup PDF. You need to change all 1999 to your new
second node in rpt.conf and extensions.conf and add the registration line
in iax.conf.



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, May 28, 2017 at 6:14 PM, "Stephen - K1LNX via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi guys,
>    I have a working node with a URI-x and I am getting ready to add a
> second node with a RIM "lite" interface from repeater builder.
>
> I uncommented all the lines for a secondary node in simpleusb.conf,
> restarted, and for some odd reason, it appears as though "devstr=" is not
> being automatically (not sure it should be, been a while since I've done a
> 2+ node setup!) populated in simpleusb_tune_usb1.conf.
>
> Is there something else missing that I need to do? I also dropped into
> simpleusb-tune-menu and selected usb1, but it is not active. I can see it
> connected to the Pi however:
>
> [root at radioserver asterisk]# lsusb
> Bus 001 Device 005: ID 0d8c:013a C-Media Electronics, Inc.
> Bus 001 Device 004: ID 0d8c:013a C-Media Electronics, Inc.
>
> Device 004 appears to be the secondary interface, I unplugged the URI to
> validate.
>
> Stephen
> K1LNX
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>