[arm-allstar] How difficult would it be to add dpl to the repeater controller of this distro?

[David McGough]

Hi,

I'm not sure what you're asking?

If you're wanting AllStar to decode/encode Digital Coded Squelch, that 
capability isn't in any current release that I know of.  However, DCS 
is on the planned features list.

As for the motorola 2000 and an audio echo, that may be a 
programming/config issue with the 2000. I know many hams use these 
repeaters successfully for AllStar.

73, David KB4FXC


On Sun, 21 May 2017, "kd4ont via arm-allstar" wrote:

> We are having problems with a Motorola 2000, forgot the exact model, 
repeater uhf. With the node IDing in voice, and controlling the rest, and 
the 2000 handling cw ID and other functions, we have an issue of initial 
key up, doing a loud echo in analog pl, for a fraction of a second, then 
the levels clamp down. 

I'm guessing that it is two controllers fighting each other. It sounds 
like the agc takes less than a second to clamp down on the levels.
We are close to deploying the hardware to the final building top but 
can't nail down what is causing this. 
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org