[arm-allstar] Disable DTMF muting?

[Pierre Martel]

Wonder if you can connect to both nodes and enter in the asterisk cli and
monitor what is decoded as dtmf at each

to do so ssh to both node and at the linux prompt enter asterisk -rvvvv the
number of time you will entre v at the end will change the verbose settings
of asterisk. It usely start at level 3. the more you will put the more
message you will see. if you put too much the dtmf detection could be
buried under lots of other message. you could need to read the asterisk log
files and filter out the dtmf comment.

Hope I was of some help

Pierre
VE2PF


2017-05-07 20:11 GMT-04:00 Pierre Martel <petem001 at gmail.com>:

> Doug beat me to it.. ;-)
>
>
> 2017-05-07 20:04 GMT-04:00 "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org>:
>
>> Is it possible that you are using a "*" at the beginning or in the
>> sequence? This would tag it as an asterisk command and it would not pass
>> through. If you must send a "*" then you would have to change the Allstar
>> leadin character.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>> On Sun, May 7, 2017 at 7:43 PM, "Justin Reed via arm-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>> > I already had propagate_dtmf=yes and it doesn't seem to make any
>> > difference. It still mutes the DTMF.
>> >
>> > A bug perhaps?
>> > Justin
>> >
>> >
>> > On 5/7/2017 6:18 PM, "Pierre Martel via arm-allstar" wrote:
>> >
>> >> http://ohnosec.org/drupal/node/134
>> >>
>> >> forgot to give the link...
>> >>
>> >>
>> >> 2017-05-07 19:18 GMT-04:00 Pierre Martel <petem001 at gmail.com>:
>> >>
>> >> Maybe this would help you?
>> >>>
>> >>> 2017-05-07 18:24 GMT-04:00 "Justin Reed via arm-allstar" <
>> >>> arm-allstar at hamvoip.org>:
>> >>>
>> >>> Group,
>> >>>>
>> >>>> Is there a way to disable DTMF muting from RF to the internet with
>> >>>> Allstar?
>> >>>>
>> >>>> Our large link system is looking to gradually move away from IRLP and
>> >>>> migrate to Allstar but one thing holding it up is being able to pass
>> >>>> DTMF
>> >>>> audio through the internet to the far end.
>> >>>> We need this in order to execute macros on our 7330 controllers no
>> >>>> matter
>> >>>> where we are within the system.
>> >>>>
>> >>>> Thanks,
>> >>>> Justin
>> >>>>
>> >>>> NV8Q
>> >>>>
>> >>>> _______________________________________________
>> >>>>
>> >>>> arm-allstar mailing list
>> >>>> arm-allstar at hamvoip.org
>> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >>>>
>> >>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> >>>>
>> >>>>
>> >>> _______________________________________________
>> >>
>> >> arm-allstar mailing list
>> >> arm-allstar at hamvoip.org
>> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >>
>> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> >>
>> >
>> >
>> > _______________________________________________
>> >
>> > arm-allstar mailing list
>> > arm-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> >
>> >
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
>