[arm-allstar] Allmon

[ken at mirlaw.co.uk]

Hi Both,

Here is a copy of my Allmon.ini and manager files.
As far as I can see they are the same as your files, I just have one node

Regards
Ken

<?php
[About]
url=about.php
[28468]
host=127.0.0.1:5038
user=admin
passwd=xxxxxxx
menu=yes
hideNodeURL=no
?>

;
; AMI - The Asterisk Manager Interface
;
; Third party application call management support and PBX event supervision
;
; This configuration file is read every time someone logs in
;
; Use the "manager list commands" at the CLI to list available manager
commands
; and their authorization levels.
;
; "manager show command <command>" will show a help text.
v;
;
; ---------------------------- SECURITY NOTE -------------------------------
; Note that you should not enable the AMI on a public IP address. If needed,
; block this TCP port with iptables (or another FW software) and reach it
; with IPsec, SSH, or SSL vpn tunnel.  You can also make the manager
; interface available over http if Asterisk's http server is enabled in
; http.conf and if both "enabled" and "webenabled" are set to yes in
; this file.  Both default to no.  httptimeout provides the maximum
; timeout in seconds before a web based session is discarded.  The
; default is 60 seconds.
;
[general]
displaysystemname = yes
enabled = yes
;webenabled = yes
port = 5038

;httptimeout = 60
; a) httptimeout sets the Max-Age of the http cookie
; b) httptimeout is the amount of time the webserver waits
;    on a action=waitevent request (actually its httptimeout-10)
; c) httptimeout is also the amount of time the webserver keeps
;    a http session alive after completing a successful action

bindaddr = 127.0.0.1   ; Local interface only!
;bindaddr = 0.0.0.0    ; Not secure
;
;displayconnects = yes
;
; Add a Unix epoch timestamp to events (not action responses)
;
;timestampevents = yes

[admin]
secret =xxxxxx
read = all,system,call,log,verbose,command,agent,user,config
write = all,system,call,log,verbose,command,agent,user,config



-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: 01 May 2017 17:25
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Doug Crompton <wa3dsp at gmail.com>
Subject: Re: [arm-allstar] Allmon

Would you not also have to allow general access to the manager(s) on the
various servers? The accessing system has to use the port and IP address of
the manager on the system you want to monitor. Thus I think you would need
to setup the manager.conf on the monitored system to allow access. In that
case the line bindaaddr=0.0.0.0 would need to be uncommented on his BBB.

The manager is not very secure but unless you port forward it  - typically
5038 - and you are behind a router and use it only locally it should not be
a problem.

 [general]

displaysystemname =
yes
enabled =
yes
;webenabled =
yes
port =
5038


;httptimeout =
60
; a) httptimeout sets the Max-Age of the http cookie ; b) httptimeout is the
amount of time the webserver waits
;    on a action=waitevent request (actually its
httptimeout-10)
; c) httptimeout is also the amount of time the webserver keeps
;    a http session alive after completing a successful
action


bindaddr = 127.0.0.1   ; Local interface
only!
;bindaddr = 0.0.0.0    ; Not secure
;



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, May 1, 2017 at 12:02 PM, "Larry via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi ken.
>
> Here is a sample of my "allmon.ini.php" this needs to be on the server 
> that is doing the node monitoring of other nodes.
>
> This server monitors a group of my other nodes. I thought it might 
> help with an example of what the Allmon2 server needs in order to log 
> into the other nodes Asterick manager.
>
> I have removed the password but it needs to match the Asterisk Manager 
> login you set on each of the other node if on different servers.
> Also ... Each server needs to have its own port number assigned as you 
> will note in the "host" settings below.
>
> Doug was correct in his reply I just thought a picture of the process 
> might help.
>
> Larry - N7FM
> ----------------------------------
> File: allmon.ini.php
>
> <?php
> [About]
> url=about.php
> [41880]
> host=127.0.0.1:5038
> user=admin
> passwd=xxxxxx
> menu=yes
> hideNodeURL=no
>
> :[41879]
> ;host=192.168.9.38:5033
> ;user=admin
> ;passwd=xxxxxx
> ;menu=nyes
> ;hideNodeURL=no
>
> [28162]
> host=192.168.9.68:5037
> user=admin
> passwd=xxxxxx
> menu=nyes
> hideNodeURL=no
>
> [28358]
> host=192.168.9.68:5037
> user=admin
> passwd=xxxxxxx
> menu=no
> hideNodeURL=no
>
> [41473]
> host=192.168.9.68:5037
> user=admin
> passwd=xxxxxxxx
> menu=nyes
> hideNodeURL=no
>
> [29018]
> host=192.168.9.50:5036
> user=admin
> passwd=
> menu=no
> hideNodeURL=no
>
>
>
>
> On 05/01/2017 05:58 AM, "Ken via arm-allstar" wrote:
> 

Visit the BBB and RPi2/3 web page - http://hamvoip.org