[arm-allstar] Soundcard FOB

[Chris Viningre]

Its a CM108B and I haven't had any problem with it being detected. I have 5
more to try so I'll see if they are different.

Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Amateur Radio Operator: WS5B
https://www.qrz.com/db/ws5b
http://www.reverbnation.com/chrisviningre

On Sun, Mar 19, 2017 at 8:12 PM, "Leighton Judd via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> G'day all,
>
> I am new to Allstar, but I thought I would share some thoughts on this
> matter.
>
> I have been playing around with similar CM108 based USB sound card devices
> also.
>
> The ones that I have are actually CM108B and required a little bit of
> modification to the code to  have them detected.
>
> I have also noticed that on one radio, I have had to increase the mic gain
> to 999 also. I think that this is just a function of the output level from
> the radio. It doesn't seem to be a problem, however I am still testing my
> setup.
>
> I am happy to share more info regarding my USB sound card and node if that
> is helpful.
>
>
> Regards,
> Leighton
>
> On Mon, 20 Mar 2017 at 13:03, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Chris,
> >
> >   We use those cards quite a bit and have had no problems. At least they
> > look like that card. What is the chip number if you can read it. Maybe
> you
> > got a bad card? Do you have another one to try?
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Sun, Mar 19, 2017 at 7:00 PM, "Chris Viningre via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I modafied this
> > > http://www.ebay.com/itm/272374780193?_trksid=p2057872.
> > > m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
> > > soundcard and it works great other than low TX and Rec audio. It's ok
> if
> > I
> > > use 999 settings on both but I would like to get it closer to the
> middle.
> > > Everything works good with the URI interface. On the Mic line I have a
> > 10uf
> > > capacitor and no resistor. RXBOOST is on. Any ideals?
> > >
> > > Chris Viningre
> > > 70 W. Roadrunner
> > > Salt Flat, Texas 79847
> > > C:(915) 504-1510
> > > chrisviningre at gmail.com
> > > Amateur Radio Operator: WS5B
> > > https://www.qrz.com/db/ws5b
> > > http://www.reverbnation.com/chrisviningre
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>