[arm-allstar] VPN

[Jeremy Utley]

I'm using OpenVPN on the Pi3 as the provider at the tower site does a
"Double-NAT" setup where it's nearly impossible to get ports forwarded back
to us.  I can help you out if you need! (sorry for the late reply, but I've
been away for a few days on a camping trip for Field Day).

Jeremy, NQ0M

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Harry Romano via arm-allstar"
Sent: Wednesday, June 21, 2017 12:09 PM
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Harry Romano <hromano at earthlink.net>
Subject: Re: [arm-allstar] VPN

Does anyone know how to setup a VPN on the pi3 with Dougs code running
allstar?

Harry 
KC4RPP


-----Original Message-----
>From: "\"Harry Romano via arm-allstar\"" <arm-allstar at hamvoip.org>
>Sent: Jun 13, 2017 12:05 PM
>To: ARM Allstar <arm-allstar at hamvoip.org>
>Cc: Harry Romano <hromano at earthlink.net>
>Subject: Re: [arm-allstar] RPi3 WiFi
>
>How do i post a question on this forum?
>
>Harry
>KC4RPP
>
>
>-----Original Message-----
>>From: "\"Doug Crompton via arm-allstar\"" <arm-allstar at hamvoip.org>
>>Sent: Jun 12, 2017 11:22 AM
>>To: ARM Allstar <arm-allstar at hamvoip.org>
>>Cc: Doug Crompton <wa3dsp at gmail.com>
>>Subject: Re: [arm-allstar] RPi3 WiFi
>>
>>iaxrpt connects TO Allstar not the other way around. I doubt it has
>>anything to do with wireless but rather something is not setup correctly.
>>One gotcha is if your Allstar IAX port is on other than 4569 you must
>>specify the port in the iaxrpt setup. It does not sound like that is the
>>problem in your case though. Remember that wireless will be a different IP
>>address than wired when using DHCP as it is a different MAC address. Make
>>sure you are trying to connect to the right IP address. You can make the
IP
>>address reserved in the router based on the MAC address of the Pi BUT you
>>can't reserve the same IP for both wire and wireless as they are different
>>MAC addresses.
>>
>>
>>*73 Doug*
>>
>>*WA3DSP*
>>
>>*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>>
>>On Mon, Jun 12, 2017 at 10:34 AM, "John Isabella via arm-allstar" <
>>arm-allstar at hamvoip.org> wrote:
>>
>>> Fresh install 1.5 from hamvoip The config creates the WPA_suppliment and
>>> connects to all star servers and can do updates. However, I can not
connect
>>> to iaxrpt on my windows machine.
>>> I took a RPi 2 and a usb WiFi adapter and put the sd card in it and it
can
>>> connect to the iax windows client. So all the settings in .conf files
are
>>> correct as well as iax windows client.
>>> If I use a hardwire to RPi3 it works. So I know the port forwarding and
>>> internal IP address are correct.
>>> I even took back the RPi3 and exchanged it for a different to eliminate
>>> the Pi3 WiFI as being defective.
>>> Anyone else have this problem or know of solution?
>>> Thanks K1IF
>>>
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>_______________________________________________
>>
>>arm-allstar mailing list
>>arm-allstar at hamvoip.org
>>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>Visit the BBB and RPi2/3 web page - http://hamvoip.org
>_______________________________________________
>
>arm-allstar mailing list
>arm-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org