[arm-allstar] VPN

[Robert Prybyzerski]

I have some notes here
http://www.qsl.net/w2ymm/allstar_vpn.html

Most should still apply, I need to update my how to information.  I'm using a Pi3 now instead of a Beagle bone black.  As far as I remember it was basically the same. 

Bob W2YMM 


Sent from my iPhone
Bob W2YMM 
631-960-1051

> On Jun 21, 2017, at 1:09 PM, Harry Romano via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Does anyone know how to setup a VPN on the pi3 with Dougs code running allstar?
> 
> Harry 
> KC4RPP
> 
> 
> -----Original Message-----
>> From: "\"Harry Romano via arm-allstar\"" <arm-allstar at hamvoip.org>
>> Sent: Jun 13, 2017 12:05 PM
>> To: ARM Allstar <arm-allstar at hamvoip.org>
>> Cc: Harry Romano <hromano at earthlink.net>
>> Subject: Re: [arm-allstar] RPi3 WiFi
>> 
>> How do i post a question on this forum?
>> 
>> Harry
>> KC4RPP
>> 
>> 
>> -----Original Message-----
>>> From: "\"Doug Crompton via arm-allstar\"" <arm-allstar at hamvoip.org>
>>> Sent: Jun 12, 2017 11:22 AM
>>> To: ARM Allstar <arm-allstar at hamvoip.org>
>>> Cc: Doug Crompton <wa3dsp at gmail.com>
>>> Subject: Re: [arm-allstar] RPi3 WiFi
>>> 
>>> iaxrpt connects TO Allstar not the other way around. I doubt it has
>>> anything to do with wireless but rather something is not setup correctly.
>>> One gotcha is if your Allstar IAX port is on other than 4569 you must
>>> specify the port in the iaxrpt setup. It does not sound like that is the
>>> problem in your case though. Remember that wireless will be a different IP
>>> address than wired when using DHCP as it is a different MAC address. Make
>>> sure you are trying to connect to the right IP address. You can make the IP
>>> address reserved in the router based on the MAC address of the Pi BUT you
>>> can't reserve the same IP for both wire and wireless as they are different
>>> MAC addresses.
>>> 
>>> 
>>> *73 Doug*
>>> 
>>> *WA3DSP*
>>> 
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>> 
>>> 
>>> On Mon, Jun 12, 2017 at 10:34 AM, "John Isabella via arm-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>> 
>>>> Fresh install 1.5 from hamvoip The config creates the WPA_suppliment and
>>>> connects to all star servers and can do updates. However, I can not connect
>>>> to iaxrpt on my windows machine.
>>>> I took a RPi 2 and a usb WiFi adapter and put the sd card in it and it can
>>>> connect to the iax windows client. So all the settings in .conf files  are
>>>> correct as well as iax windows client.
>>>> If I use a hardwire to RPi3 it works. So I know the port forwarding and
>>>> internal IP address are correct.
>>>> I even took back the RPi3 and exchanged it for a different to eliminate
>>>> the Pi3 WiFI as being defective.
>>>> Anyone else have this problem or know of solution?
>>>> Thanks K1IF
>>>> 
>>>> _______________________________________________
>>>> 
>>>> arm-allstar mailing list
>>>> arm-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>> 
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>> _______________________________________________
>>> 
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org