[arm-allstar] SSH Enable

[David]

The SSH command did not work. I did load a new image and SSH was enabled from the get go. I also brought on line a second node hooked to a v71 no issue. You hit the nail on the head. The image was corrupted!
Thanks for the other reply too.


Sent from my T-Mobile 4G LTE Device
-------- Original message --------From: Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> Date: 6/5/17  9:17 PM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Doug Crompton <wa3dsp at gmail.com> Subject: Re: [arm-allstar] SSH Enable 
ssh is enabled on ALL hamvoip releases and the fact that it is not on your
assuming you did not diable it points to some kind of corruption. I would
have no idea why it would be turned of. As far as I know you are the first
person who has had that problem. This is what you should see -

# systemctl status sshd

* sshd.service - OpenSSH Daemon
   Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor
preset: disabled)
   Active: active (running) since Mon 2017-05-01 12:53:34 EDT; 1 months 4
days ago
 Main PID: 341 (sshd)
    Tasks: 1 (limit: 512)
   CGroup: /system.slice/sshd.service
           `-341 /usr/bin/sshd -D

and the log of connections not displayed.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Jun 5, 2017 at 9:14 PM, "David via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Thanks for the reply. I have not changed anything and can see SSH is not
> enable on boot up. I am aware of port 222. I did not see anyway to enable
> SSH from the scripts only change port number. Is there a specific file I
> can edit?
> -------- Original message --------From: David McGough <kb4fxc at inttek.net>
> Date: 6/5/17  1:54 PM  (GMT-06:00) To: David via arm-allstar <
> arm-allstar at hamvoip.org> Cc: David <david at kg5rdf.com> Subject: Re:
> [arm-allstar] SSH Enable
>
> Hi David,
>
> ssh comes pre-enabled in all V1.5 firmware images. However, the port is
> non-standard---try connecting to port 222.
>
> Note that you can change this port, etc., from the setup scripts and/or
> the admin menu.
>
> 73, David KB4FXC
>
>
> On Mon, 5 Jun 2017, "David via arm-allstar" wrote:
>
> > Trying to enable SSH with RPi2-3 Image Version 1.5rc2 on a Raspberry pi
> 3. Is there a specific file I can edit or where is the proper placenent of
> the blank file name: ssh to invoke It?
> > Thanks David
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> null
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org