[arm-allstar] SSH Enable

[Jeremy Utley]

I would recommend against this, unless you simply have no other
option, and if you do, I would recommend setting the "PermitRootLogin
without-password" in the sshd configuration.  Changing the port is
nothing but security by obscurity.  Far better if you're going to
leave SSH open to the world, you limit it to only SSH-Key
authentication.  Take it from someone who just had his hub node
running on Dial compromised last night, and a Linux sys-admin by day!

Jeremy, NQ0M

On Mon, Jun 5, 2017 at 2:59 PM, "Nathaniel Biser via arm-allstar"
<arm-allstar at hamvoip.org> wrote:
> Also, make sure open up the port on your router if you plan to access it
> remotely.  I just opened 222 to the outside and port forwarded it to the
> local IP of my node using the same port internally.
>
> Hope this helps!
>
> Nate
> KC3HOZ
>
> On Mon, Jun 5, 2017 at 2:51 PM "David via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Trying to enable SSH with RPi2-3 Image Version 1.5rc2 on a Raspberry pi 3.
>> Is there a specific file I can edit or where is the proper placenent of the
>> blank file name: ssh to invoke It?
>> Thanks David
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org