[arm-allstar] Question on tax registry

W0KGW w0kgw3 at gmail.com
Sun Jul 30 22:07:23 EST 2017 

Negative on the extra nodes here, just have the one. I could repurpose another pi3 I have sitting here as a temporary node if needed.

Waiting about 10 minutes of having it offline, I now see this:
allstarpi1*CLI> iax2 show registry 
Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569   Y       41187       50.107.40.248:4569         60  Registered

But on the node list it’s not showing up at all. I did find one oddity, when I click on supernodes/RPT Status with 41187 in the box, it comes up to the normal bluish colored screen, except where you normally see other nodes, it just lists:

“Node 41187 is no longer in the database”


> On Jul 30, 2017, at 9:47 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Joel,
> 
> Before you pull your hair out this may be an Allstar registration server
> problem. It has happened before. Try taking it offline entirely overnight
> and try again tomorrow. If it persists we will have to take it from there.
> 
> Do you have other nodes there that are registering properly?
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> On Sun, Jul 30, 2017 at 10:22 PM, "W0KGW via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> [root at allstarpi1 asterisk]# ping allstarlink.org
>> PING allstarlink.org (67.215.233.179) 56(84) bytes of data.
>> 64 bytes from allstarlink.org (67.215.233.179): icmp_seq=1 ttl=48
>> time=72.6 ms
>> 64 bytes from allstarlink.org (67.215.233.179): icmp_seq=2 ttl=48
>> time=71.9 ms
>> 64 bytes from allstarlink.org (67.215.233.179): icmp_seq=3 ttl=48
>> time=72.9 ms
>> 64 bytes from allstarlink.org (67.215.233.179): icmp_seq=4 ttl=48
>> time=73.1 ms
>> ^C
>> --- allstarlink.org ping statistics ---
>> 4 packets transmitted, 4 received, 0% packet loss, time 3180ms
>> rtt min/avg/max/mdev = 71.977/72.673/73.120/0.436 ms
>> 
>> All connections are wired.
>> Internet is DSL, and stable, other devices are using it just fine.
>> Firewall hasn’t changed rules and was working pre-thursday.
>> 
>> /var/lib/asterisk/rpt_extnodes.txt does not exist
>> 
>> I do see this via supermon/All Nodes Status
>> 
>> **************************** CHANNELS *****************************
>> Channel                      Peer             Username    ID (Lo/Rem)  Seq
>> (Tx/Rx)  Lag      Jitter  JitBuf  Format  FirstMsg    LastMsg
>> (None)                       67.215.233.178   (None)      00698/00000
>> 00001/00000  00000ms  0000ms  0040ms  unknow  Tx:REGREQ   Tx:REGREQ
>> IAX2/iaxrpt-5029             192.168.33.123   iaxrpt      05029/25041
>> 00204/00196  00085ms  0000ms  0040ms  unknow  Rx:NEW      Tx:ACK
>> 2 active IAX channels
>> The odd part is the (None) for username, shouldn’t that have my node ID as
>> a username to register with?
>> 2nd node registered is my iaxrpt client, so at least I know it can accept
>> a local subnet login and send/hear audio fine.
>> 
>> Cheers,
>> Joel
>> W0KGW
>> 
>>> On Jul 30, 2017, at 7:59 PM, Doug Crompton via arm-allstar <
>> arm-allstar at hamvoip.org> wrote:
>>> 
>>> Joel,
>>> 
>>> Yes it says it is not registering so that is the issue. A couple of
>>> questions -
>>> 
>>> You do have good Internet access and domain lookup?
>>> 
>>> At the Linux prompt ping allstarlink.org or ucsd.edu
>>> Are you getting returns?
>>> 
>>> Are you using a wireless provider through a cell or a fixed connection at
>>> home either wired or wireless?
>>> 
>>> 
>>> *73 Doug*
>>> 
>>> *WA3DSP*
>>> 
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>> 
>>> 
>>> 
>>> 
>>> On Sun, Jul 30, 2017 at 8:34 PM, "Joel Jameson via arm-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>> 
>>>> I’ve been trying to track down a gremlin that since Thursday my node is
>>>> unable to be connected to, nor can it connect to anything else. It’s
>>>> happily working locally, with all it’s anouncements and such.
>>>> 
>>>> I’m pretty sure it’s related to registering with allstar, I’ve verified
>>>> the node and password are correct in iax.conf.
>>>> 
>>>> allstarpi1*CLI> iax2 show registry
>>>> Host                  dnsmgr  Username    Perceived             Refresh
>>>> State
>>>> 67.215.233.178:4569   Y       41187       <Unregistered>             60
>>>> Timeout
>>>> allstarpi1*CLI> iax2 show registry
>>>> Host                  dnsmgr  Username    Perceived             Refresh
>>>> State
>>>> 67.215.233.178:4569   Y       41187       <Unregistered>             60
>>>> Request Sent
>>>> allstarpi1*CLI>
>>>> 
>>>> It just does this over and over, going from request sent to timeout,
>> then
>>>> repeating.
>>>> 
>>>> Any ideas or suggestions?
>>>> 
>>>> Cheers,
>>>> Joel
>>>> W0KGW
>>>> _______________________________________________
>>>> 
>>>> arm-allstar mailing list
>>>> arm-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>> 
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>> _______________________________________________
>>> 
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the arm-allstar mailing list